Aubert ¾ Violin Bridge. Click Here for Pricing, Pictures and Reviews on Amazon. ...
Generic Maple Bridge. Click Here for Pricing, Pictures and Reviews on Amazon.
For good measure, how much does it cost to replace a bridge on a violin?
Basic Repair Prices (see below for Bow repairs) Prices do NOT include parts.
Bridge - refit or fix warp
Bridge - replace (labor only - see below)
Into the bargain, where should the bridge be on a violin? To ensure it is in its proper, straight position, first hold the instrument up and look straight at the bridge, making sure it's standing at a right angle. It should be straight and parallel to the fingerboard and centered between the f-holes. The feet of the bridge should lay flat with the belly of the violin.
In addition, should a violin bridge have notches?
The shape and placement of the violin bridge are critical for maximizing the instrument's potential. The bridge feet should be centered on the f-hole notches. ... If they aren't, then not all of the string vibrations are being conveyed into the instrument and the sound quality is definitely suffering.
How tall should a violin bridge be?
around 33 mm high
BESTSELLER NO. 1 in 2021
1 4/4 Violin Aubert Semi Fitted Bridge: 100543 Teller Germany 01042FU, With E Ebony insert, of Bosnian Maple A Product of Germany VWWS
Very fine, Bosnian Maple Air Dried
Teller *** German 4/4Violin bridge with E Ebony U insert
Don't forget to thickness the feet of the bridge before you start fitting the feet. The finished thickness of the feet is 4.2 mm and I like to leave myself 0.06 mm extra for sanding. It's also important to establish which side of the bridge will be the front and which side will be the back of the bridge.
Before asking questions like this one, it might be a good idea to try playing a violin without a bridge. ... As far as long nails are concerned, I keep mine short, and so the answer is yes, you CAN play a violin without long nails. In fact, I've never tried to play one WITH long nails.
Most of the time the violin bridge snaps forward, because tightening the strings tends to move the top of the bridge forward. Occasionally, the bridge snapping off causes the soundpost inside the violin to fall down.
A violin bridge is a small piece of wood. The bottom of the bridge is usually a straight line, while the top is arched slightly. When you're examining your bridge, you'll notice one side of the arch is slightly higher than the other. The lower side is the e-string side, and the taller side is the g-string side.
But is there a difference between violin playing and fiddle playing? Yes. As a general rule, a violin is used for classical music and a fiddle is used for folk, country, and bluegrass. In the rock and jazz idioms, the terms are used more interchangeably.
A bridge is the most important fitting on the exterior of the violin and the sound of your instrument depends to some extent on its shape, height, position and the angle. It is not fixed or glued into position but is held in place by the tension of the strings passing over its top edge.
The catenary arch helps to distribute the large downward pressure of the strings pushing down on the bridge. ... Under the right hand side of the bridge is a dowel post that also assists in supporting the downward pressure from the bridge/strings a well as transmitting vibrations to the back plate.
Bridge blanks come in different sizes. A standard full-size bridge is 41.5 millimetres wide, but a narrow violin will require a smaller bridge. A trained luthier will be able to tell you if your violin needs a non-standard bridge.
The bridge is evenly lined up with the fingerboard, and should stand straight up, perpendicular to the violin. The feet of the bridge should be aligned with the interior notches of the F-holes. The lower side of the bridge should be placed under the E string (the string with the highest pitch).
1. Measure the distance from the end of the nut closest to the fingerboard to the edge of the violin top next to the neck. 4. The resulting measurement (from the edge by the neck, to the center of the bridge foot) is the proper location of the bridge for the violin/viola, thus a 2:3 ratio.