Best Tune O Matic Bridge

Category: tune o matic 👁 306 👍 38 ★★★★☆4.8

1/2"

One may also ask, what is a Nashville Tune o matic bridge?

The Nashville Tune-o-matic was introduced after Gibson moved from Kalamazoo to Nashville in the '70s. It offers a wider range of saddle adjustment than the ABR-1, which is great for intonation. This bridge is a bit larger than the ABR-1, and its support posts screw into metal bushings pressed into the guitar top.

In any event, how do you replace tune o matic bridge? How To Install Tune-O-Matic Bridge Posts

  • Step 1: Alignment. Place a long ruler along the side of the fingerboard and extend the ruler onto the guitar body. ...
  • Step 2: Find the bridge position. ...
  • Step 3: Drill the holes. ...
  • Note: check your measurements one more time… ...
  • Step 4: Verify.
  • Quite so, how do I raise my tune o matic bridge?

    To raise the action on a Les Paul's Tune-o-matic bridge, turn the thumbwheels counter-clockwise (Photo 5). Do this in small increments, perhaps a quarter of a rotation for each thumbwheel. Retune the guitar, put a capo on the 1st fret, and then measure the action at the 12th fret again.

    What is the best tune o matic bridge upgrade?

    • Tonepros LPCM04-C Standard Bridge/Tailpiece Set Chrome New.
    • Gotoh Tune-o-matic Bridge with Standard Posts, Chrome.
    • Graphtech String Saver ResoMax NV1 Autolock Bridge.
    • TUNE-O-MATIC ROLLER SADDLE BRIDGE - CHROME.
    • ABR-1 Style Tune-o-matic Bridge & Tailpiece Chrome for Gibson Les Paul.

    BESTSELLER NO. 1 in 2021

    KAISH Black Guitar Roller Saddle Bridge Tune-O-Matic Bridge For Epiphone Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts

    KAISH Black Guitar Roller Saddle Bridge Tune-O-Matic Bridge For Epiphone Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts
    • Precision engineered, with high quality Plating. The roller saddles are perfect for using with a Bigsby, or just to reduce string breakages and add sustain on any LP style guitar. This model has 6.3mm post holes to drop over 6mm posts, typically found on most Epiphone guitars and many other similar import guitar brands.
    • Includes anchors and large M8 threaded bridge posts with 6mm diameter top section
    • High stability saddle retention rings to eliminate saddle rattle
    • 2.05"(52mm) string spacing E to e; 73.5mm center to center post spacing,Bridge is 14" radius.
    • Tune-O-Matic style bridge with roller saddles for increased tuning stability, higher sustain and less string breakages. 6 saddles with independent intonation adjustment
    BESTSELLER NO. 2 in 2021

    Gotoh Tune-o-matic Bridge with Studs/Bushings, Chrome

    Gotoh Tune-o-matic Bridge with Studs/Bushings, Chrome
    • A modern version of the Tune-o-matic bridge for solidbody guitar
    • The metal saddles have helpful starter grooves to guide your slotting files
    • Intonation screws are retained by mini hex nuts
    • Includes threaded thumbwheel studs and bushings
    • String spread is 2-1/16", and post spacing is 2-29/32"; post threads are M8 x 1.25
    BESTSELLER NO. 3 in 2021

    Wilkinson 52mm(2-3/64 inch) String Spacing Wide Style Tune-o-matic Bridge Compatible with USA Les Paul/Epiphone Les Paul Style Guitar, Chrome

    Wilkinson 52mm(2-3/64 inch) String Spacing Wide Style Tune-o-matic Bridge Compatible with USA Les Paul/Epiphone Les Paul Style Guitar, Chrome
    • Fits some USA Les Paul and Epiphone Les Paul/SG/ES-335 models etc, also work with other LP style guitar. Please measure before you buy
    • Genuine Wilkinson parts. 52mm(2-3/64 inch) string spacing, saddle radius is 12 inch. Zinc made
    • Post spacing is 74mm(2-29/32 inch), post threads is M8, outside diameter 11.80mm. For more size detail, please check the size image
    • Wider version fixed bridge gives more intonation adjustment to each strings. Large post can be adjusted with a screwdriver
    • Includes bridge and mounting accessories. Ready to use
    BESTSELLER NO. 4 in 2021

    Metallor Tune-O-Matic Electric Guitar Bridge for SG Les Paul LP Style Guitar Parts Replacement Chrome.

    Metallor Tune-O-Matic Electric Guitar Bridge for SG Les Paul LP Style Guitar Parts Replacement Chrome.
    • Brand new Tune-O-Matic style adjustable guitar bridge in geniune chrome plate. Perfect replacement bridge for your LP SG or just about any guitar that has this setup.
    • The bridge mounting posts are on 74mm centre to centre measurements. The bushes, which force fit into the guitar body, need  a 10mm diameter hole to fit into. Please see the diagram for other dimensions.
    • Typically found on Les Paul / SG style guitars, this bridge has an overall string span of 52mm with the six individual saddles profiled for a slightly curved fingerboard. Each saddle is adjustable for intonation.
    • The bridge is supplied with splined bushing to fit into the guitar body that hold the 6.3mm diamter adjustable posts that fit either end of the bridge.
    BESTSELLER NO. 5 in 2021

    Gotoh Tune-o-matic Bridge with Standard Posts, Chrome

    Gotoh Tune-o-matic Bridge with Standard Posts, Chrome
    • A popular modern version of the Tune-o-matic for solidbody guitar
    • Saddles are pre-notched with individual saddle intonation screws retained by mini hex nuts
    • Saddle radius: 12"
    • String spread is 2-1-16", and post spacing is 2-29/32"; stud threads are M4 x .7
    BESTSELLER NO. 6 in 2021

    Roller Saddle Tune-O-Matic Bridge for Epiphone Les Paul SG Guitar w/ m8 threaded posts Chrome

    Roller Saddle Tune-O-Matic Bridge for Epiphone Les Paul SG Guitar w/ m8 threaded posts Chrome
    • Reduced string breakeage - increased tuning stability This is a Tune-o-matic Bridge. This bridge features individual Roller Saddles, and the high stability "E" saddle retaining clips. This is the perfect replacement bridge for your Les Paul, SG or just about any guitar that has this setup
    • No.:BM005 Country of Manufacture:Made In Korea
    • Roller Bridge For Gibson Epiphone Les Paul、SG、ES335、DOT & Ibanez Guitar Large M8 threaded bridge posts with Φ6.3 mm diameter top section,14" radius Bridge post spacing is 73.5mm,string spacing of the bridge is 10.4mm,width is 84.5mm
    • Package Including:Bridge x 1,Stud x 2,If do not fit,contact us for help ,thanks!
    • Large M8 threaded bridge posts with 6mm diameter top section 14" radius 2.05" (52mm) string spacing E to e 2 15/16" (74.4mm) center to center post spacing
    BESTSELLER NO. 7 in 2021

    Dopro Guitar Roller Saddle Bridge Tune-O-Matic Bridge For Epiphone Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts Chrome

    Dopro Guitar Roller Saddle Bridge Tune-O-Matic Bridge For Epiphone Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts Chrome
    • Precision engineered, with high quality Plating. The roller saddles are perfect for using with a Bigsby, or just to reduce string breakages and add sustain on any LP style guitar. This model has 6.3mm post holes to drop over 6mm posts, typically found on most Epiphone guitars and many other similar import guitar brands.
    • Includes anchors and large M8 threaded bridge posts with 6mm diameter top section
    • High stability saddle retention rings to eliminate saddle rattle
    • 2.05"(52mm) string spacing E to e; 73.5mm center to center post spacing
    • Tune-O-Matic style bridge with roller saddles for increased tuning stability, higher sustain and less string breakages. 6 saddles with independent intonation adjustment
    BESTSELLER NO. 8 in 2021

    Allparts GB-0596-010 Chrome Roller Tunematic

    Allparts GB-0596-010 Chrome Roller Tunematic
    • Genuine AllParts Item
    BESTSELLER NO. 9 in 2021

    lotmusic A0086Lotmusic 1set ABR-1 Style Tune-o-matic Bridge & Tailpiece Chrome for Gibson Les Paul Gear Replacement

    lotmusic A0086Lotmusic 1set ABR-1 Style Tune-o-matic Bridge & Tailpiece Chrome for Gibson Les Paul Gear Replacement
    • The post spacing is 73.2mm
    • The string spacing of the bridge is 10.4mm
    • The width is 84mm
    • Coulour:silver
    BESTSELLER NO. 10 in 2021

    FLEOR Electric Guitar Tune-O-matic Bridge & Tailpiece with Studs Set Fit Gibson Epiphone Les Paul Guitar Part, Black

    FLEOR Electric Guitar Tune-O-matic Bridge & Tailpiece with Studs Set Fit Gibson Epiphone Les Paul Guitar Part, Black
    • Guitar tune-on-matic bridge & tailpiece set fit Les Paul electric guitar part.
    • Bridge: distance from E to E is approx. 2.04in/52mm; Stud Spacing: 2.87inch/73mm.
    • Tailpiece string space: 0.47in/10.28mm; lenghth is 3.90in/99.3mm.
    • Material: zinc alloy; Color: black.
    • Package Included: 1 x tune-o-matic bridge and 1 x tailpiece with 4 studs.

    6 More Questions Answered

    How high should the bridge be on a Les Paul?

    Its bridge has to be high because of the angle of the neck to the body. The optimum neck angle for a Les Paul is about 4°, but they vary between individual guitars from about 3° to 5°. This variation in angle is why the bridge and tailpiece need to be height-adjustable. The steeper the angle, the higher the bridge.

    How do I know if my guitar action is too high?

    There are several telltale signs that a guitar is in need of a set-up. If the intonation is off, the action is too high, the guitar buzzes when you fret a note, strings stop vibrating and buzz as you bend them, frets feel sharp, or neck appears warped, then your guitar definitely needs a set-up.

    How do you clean a tune o matic bridge?

    Remove the screws and give each a good cleaning with lighter fluid (naphtha) or alcohol, and an old toothbrush. Once dry, lubricate the screw threads with a drop or two of 3-in-1 oil and run the screws in and out to distribute the oil evenly.

    Why are guitar bridges slanted?

    The simplest explanation is that with the slanted pickup positioning, you get more response from the treble strings and more control over the low-end strings. The closer the pickups are to the bridge, the brighter and more treble-heavy the sound becomes.

    What does ABR 1 mean?

    Vintage

    How do you do the notch saddles bridge?