Best Scope Mounts For Picatinny Rail

Category: picatinny rail 👁 680 👍 28 ★★★★☆4.1

Picatinny Scope Rings

  • Weaver 4-Hole Tactical Picatinny Aluminum Scope Rings - Matte - 1" Medium. ...
  • Weaver 6-Hole Picatinny Tactical Scope Rings 1" High. ...
  • Burris 2-Piece Aluminum XTR Xtreme Tactical Rings 30mm Low Matte. ...
  • Weaver 4-Hole Tactical Picatinny Aluminum Scope Rings - Matte - 1" High. ...
  • Warne Maxima Fixed Scope Rings - 30mm Medium, Matte.

Similar, can Weaver mounts fit Picatinny rail?

Compatibility with Picatinny Many rail-grabber-mounted accessories can be used on either type of rail, and accessories designed for a Weaver system will generally fit Picatinny rails – although not vice versa. ... 180 width of the Weaver, and the spacing of slot centers is 0.394 in (10.008 mm).

Be that as it may, what can you put on a Picatinny rail? From scopes to lasers, to grips, to bipods and bayonets and iPhone holders, it seems that you can mount just about anything short of the proverbial kitchen sink....However, that does not stop them from looking any more outlandish.

  • Bottle opener. ...
  • Chainsaw grip. ...
  • Actual chainsaw. ...
  • Cup holders/battle mugs. ...
  • Tactical Axes.
  • In one way or another, what is the best scope mount?

    Best Scope Mounts

  • Vortex Optics Pro Riflescope Rings. Vortex makes some great optics across all budgets, and their rings are no different. ...
  • Nikon Black Precision 1 Piece. Ooh, this one is slightly more expensive, but for its purpose is relatively cheap. ...
  • Aero Ultralight Mount. ...
  • Leupold Dual Dovetail. ...
  • Burris AR-P.E.P.R. ...
  • Warne QD rings.
  • What is the difference between a Picatinny rail and a Weaver rail?

    The two major areas where the picatinny rail differs from the weaver style are the number of slots, the slot placement and the slot dimensions. the basic difference between the weaver and picatinny slot dimension is that the picatinny has a slightly wider, and slightly deeper slot.

    BESTSELLER NO. 1 in 2023

    Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height - Medium

    Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height - Medium
    • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
    • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
    • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
    • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts
    • Available in two heights to match your needs: 0.80 inch and 1.00 inch
    BESTSELLER NO. 2 in 2023

    UTG Super Slim Picatinny Riser Mount, 1" Height, 13 Slots

    UTG Super Slim Picatinny Riser Mount, 1
    • A fresh new look precision CNC Machined from aircraft grade aluminum and finished in a matte black hard coat anodize
    • Distinctive scalloped Picatinny slots for snag free accessory mounting
    • Continuous rail edge design allows the installation of multiple riser mounts side by side to form one continuous Picatinny rail
    • Included components: Torx wrench
    BESTSELLER NO. 3 in 2023

    Fidragon Rifle Scope Mount 1in 25.4mm/1.18in 30mm Quick Release Cantilever for Picatinny Weaver Rail and 2Pcs 45 Degree Rail Mount 4 Slots Picatinny Weaver Rail

    Fidragon Rifle Scope Mount 1in 25.4mm/1.18in 30mm Quick Release Cantilever for Picatinny Weaver Rail and 2Pcs 45 Degree Rail Mount 4 Slots Picatinny Weaver Rail
    • Can combine the quick release mount and 45 degree rail toghther,provide more combinations for rifle scope, laser and flashlight
    • Comes with 25.4mm(1in) reducer inserts so you can use this with 30mm and 25.4mm(1in) body tube rifle scopes.
    • Easy installation, perfect for amateurs and professionals
    • Fits 20mm picatinny weaver rails
    • Single hex nut secures mount to picatinny weaver style rail(allen wrench included),Black anodized matte finish High grade aluminum construction.
    BESTSELLER NO. 4 in 2023

    Modkin 1 Inch Scope Rings, 2 Pieces High Profile Scope Mounts + 2 Pieces Medium Profile 1 Inch Scope Rings for Picatinny/Weaver Rail - Pack of 4

    Modkin 1 Inch Scope Rings, 2 Pieces High Profile Scope Mounts + 2 Pieces Medium Profile 1 Inch Scope Rings for Picatinny/Weaver Rail - Pack of 4
    • 【Perfect for All 21mm Picatinny/ Weaver Rails】Modkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny/ Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1 inch / 25.4mm Scope Tube.
    • 【Hollowed-Out Design & Built-In Tape Protection】Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately.
    • 【Premium Aircraft Aluminum, Solid & Durable】Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.
    • 【Rail Clamp Screw Design & Easy To Install】With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.
    • 【4 Set Of Two Styles 1 inch Scope Rings】2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension: 1.9 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring; 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension: 2.0 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring.
    BESTSELLER NO. 5 in 2023

    Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

    Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
    • Double scope ring mount for Picatinny/ Weaver Rail (21mm).
    • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
    • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
    • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
    • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
    BESTSELLER NO. 6 in 2023

    IORMAN 2 Pcs Rifle Scope 30mm 25.4mm 1 inch Tactical Light Flashlight Mounts Scope Ring Adaptor with Picatinny Weaver Universal Rail

    IORMAN 2 Pcs Rifle Scope 30mm 25.4mm 1 inch Tactical Light Flashlight Mounts Scope Ring Adaptor with Picatinny Weaver Universal Rail
    • ✪✪ 2 Pcs Weaver style 30mm to 25.4mm scope adapter
    • ✪✪ 4 slots picatinny weaver rail for backup Second Laser, sight or light flashlight
    • ✪✪ with double allen head screws on both sides makes this mount very secure for any scope
    BESTSELLER NO. 7 in 2023

    Monstrum Tactical 30 mm Rifle Scope Mounted Picatinny Rail Mount for Red Dot/Reflex Sights

    Monstrum Tactical 30 mm Rifle Scope Mounted Picatinny Rail Mount for Red Dot/Reflex Sights
    • Attaches to 30mm rifle scope tubes, allowing you to mount a backup sighting system atop your rifle scope
    • 30mm ring fastens around 30mm scope tubes, installing via two set screws and included hex key
    • The Picatinny rail mount will accept any standard Picatinny red dot/reflex sight or other optics
    • Crafted from sturdy, lightweight aluminum, the rail mount weighs 2 ounces and is 2 inches in length
    BESTSELLER NO. 8 in 2023

    Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting.

    Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting.
    • Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.
    • [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
    • [Easy to Operate]Scope mount with two round buttons for easy detach.
    • [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
    • Defect: Whether it is installed or disassembled, you need to remove 12 screws
    BESTSELLER NO. 9 in 2023

    HIRAM Green Red Dot Sight 1x20mm Micro Rifle Scope 4 MOA Reflex Sight with Illuminated Reticle and 7 Brightness Levels, 20mm Picatinny Rail Riser Scope Mount, Waterproof Fogproof Tactical Accessory

    HIRAM Green Red Dot Sight 1x20mm Micro Rifle Scope 4 MOA Reflex Sight with Illuminated Reticle and 7 Brightness Levels, 20mm Picatinny Rail Riser Scope Mount, Waterproof Fogproof Tactical Accessory
    • RED & GREEN DOT RETICLES: Toggle between red and green dot reticles with 7 different brightness settings to keep shooting from dawn until dusk. Simply press both controls simultaneously to change settings.
    • ELIMINATE CENTERING: With the parallax-free red dot design, the reflex sight scope follows the movement of the user’s eye while remaining fixed on the target, eliminating any need for centering.
    • PRECISE TARGET ACQUISITION: Hold zero with 1 x 20mm 4 MOA fingertip windage and elevation controls that allow for quick adjustment in the field or at the shooting range.
    • REMOVABLE .83” RAIL RISER: Picatinny mount fits 20mm rails and installs with or without the .83” scope riser to customize your setup with easy installation and removal (mounting tools included).
    • WATER/FOGPROOF DURABILITY: Fully waterproof and fogproof with sealed housing. Aircraft grade aluminum alloy construction resists damage from rough handling and makes this optic easy to clean (includes cleaning cloth).
    BESTSELLER NO. 10 in 2023

    Evolution Gun Works Picatinny Rail, Black, Remington 700 SA, 20 MOA

    Evolution Gun Works Picatinny Rail, Black, Remington 700 SA, 20 MOA
    • ITAR PRODUCT. By adding to cart, I confirm that I am U.S. Person, I agree that I do not intend to export this product, and I understand this product is regulated by the International Traffic in Arms Regulations (ITAR).
    • This mount comes standard with a bevel on both sides making it ambidextrous.
    • The bolt pattern on our Remington 700 Short Action mount fits Short Action Remington 700 rifles (example 223, 308), as well as the 722 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.

    8 More Questions Answered

    Is 30mm the same as 1 inch?

    A 1 inch rifle scope has a main tube diameter of 1 inch, or 25.4mm. A 30mm scope's main tube is 30mm thick, obviously. This was originally due to differences in manufacturing methods and the fact that European manufacturers used the metric system. However, a 30mm scope does offer two advantages over one inch scopes.

    What is a 20 MOA rail mean?

    The scope mount cants downward at 20 MOA, which will allow you to zero your gun at a greater distance. We typically recommend zeroing a rifle with a 20 MOA rail at 200 yards. ... One MOA = 1" at 100 yards or 6 inches at 600 yards. 20 MOA = 200 inches at 1000 yards.

    Does Picatinny fit Lok?

    The Two-Slot M-LOK to Picatinny Rail Adapter allows you to use your favorite M-LOK attachments and accessories on the classic Picatinny rail system that many rifles still utilize. Giving you two slots of M-LOK rail space, shooters will have no problem fixating their goodies to their rail systems.

    Is M Lok the same as Picatinny?

    Unlike M-LOK and KeyMod handguards, which use the negative space/void between the handguard and barrel to attach accessories, the Picatinny system uses raised rails that sit on all four sides of the handguard. These rails contain a series of raised bars with angled sides. They act the mounting point for each accessory.

    How tight should Picatinny rail be?

    8-10in lbs should be just fine. Thank you Bob. I use 15 in/lbs myself. If you don't have a torque wrench, as tight as you can get it with your fingers using only the short side of the allen wrench is a pretty good standard also.

    Why are Picatinny rails numbered?

    Picatinny rails are usually numbered so that optics can be attached at the same point after removal. Failure to use the same slot can result in point of impact shifts.

    Are Picatinny rails universal?

    Even though they look similar and serve the same purpose, Picatinny and Weaver rails are not completely compatible, so it's important to understand the differences between the two before you start adding accessories to your guns.

    Do I need a 20 MOA scope mount?

    Why would anyone need a 20MOA base? A 20MOA base is only needed for certain applications. When a shooter is adjusting the elevation dial on the scope for ranges longer than what the gun is zeroed for, at some point, they will run out of elevation in the scope. In many instances this is around 600 yards, give or take.