Best Safety Harness

Category: safety harness 👁 238 👍 6 ★★★★☆4.9

Best Safety Harnesses

  • 3M. DBI-Sala ExoFit NEX. A professional-grade fall arrest and safety harness with added comfort points, but its breakaways and cam locks may work loose over time. ...
  • Guardian. Velocity. ...
  • KwikSafety. 3 D-Ring Industrial Fall Protection Safety Harness. ...
  • Guardian. Seraph. ...
  • 3M. Protecta PRO.

Apart from that, will your safety harness kill you?

Harnesses can become deadly whenever a worker is suspended for durations over five minutes in an upright posture, with the legs relaxed straight beneath the body. ... A carpenter working alone is caught in mid-fall by his safety harness, only to die 15 minutes later from suspension trauma.

In any manner, what height should a safety harness be? b A full body harness with a Self-Retracting Lifeline must be used when working at height with a fall potential that is less than 18 feet. (With the exception of controlled Mine Rescue activities).

Not only that, how much does a safety harness cost?

Many people when they initially look for a harness will see a basic harness for $90 and then see the same type of fall arrest harness for $400 and wonder why the massive difference in cost. Basically it comes down to comfort and usability. All safety harnesses must comply with AS1891.

How often should a safety harness be replaced?

Depending on the industry, it can range from 6 months to 6 years. Some safety harnesses can even last over 10 years depending on the amount of use and the quality of the maintenance and storage it sees. There are many factors to consider before continued use of your harness.

BESTSELLER NO. 1 in 2021

KwikSafety (Charlotte, NC) SCORPION Safety Harness w/attached 6ft. Tubular Lanyard on back | OSHA ANSI Fall Protection | INTERNAL Shock Absorbing Lanyard | Construction Carpenter Scaffolding

KwikSafety (Charlotte, NC) SCORPION Safety Harness w/attached 6ft. Tubular Lanyard on back | OSHA ANSI Fall Protection | INTERNAL Shock Absorbing Lanyard | Construction Carpenter Scaffolding
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
BESTSELLER NO. 2 in 2021

Full Body Safety Harness Tool Fall Protection with 5D-Rings and Waist Belt,Universal Personal Protective Equipment (A)

Full Body Safety Harness Tool Fall Protection with 5D-Rings and Waist Belt,Universal Personal Protective Equipment (A)
  • █ SAFETY DESIGN PERFORMANCE:When supported by the dorsal attachment during a fall, the design of GLOROUSCHU Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Energy absorption system with 30mm Polymide webbing and PVC container case reduces the force of impact during fall. Each of our products is Individually inspected.
  • █ Lightweight and Comfortable: Our roofers safety harness fits a weight range of 130-310lbs. It was felt light and comfortable without being restrictive when you keep focusing on your working safety at height. You can wear it all day long.
  • █ Great Size: Our 5-point full body harness a good general purpose safety harness for men and women. Waist size: 80-140cm(31.49inch-55.12inch) Leg size: 60-75cm(23.62inch-29.53inch).
  • █ Emportant Equipment Choice:Great for use in Construction, Demolition, Climbing, Welding, Roofing, Camping, Emergency, First responder, Landscaping, Paving, Police, Railroad, Sanitation, Security, Surveyor.
  • █ WARRANTY: 45 Days Money-Back & 2 Years Warranty, When You Are Not Satisfied with Our Product, Please Don't Hesitate to Contact Us. BUY WITH CONFIDENCE
BESTSELLER NO. 3 in 2021

Palmer Safety Fall Protection Full Body 5 point Harness, Padded Back Support, Quick-Connect Buckle, Grommet Legs, Back&Side D-Rings, OSHA ANSI Industrial Roofing Tool Personal Equipment (Blue - LG)

Palmer Safety Fall Protection Full Body 5 point Harness, Padded Back Support, Quick-Connect Buckle, Grommet Legs, Back&Side D-Rings, OSHA ANSI Industrial Roofing Tool Personal Equipment (Blue - LG)
  • 🧰 WORK SAFELY - Palmer Safety Harnesses are designed and tested to comply with applicable OSHA and ANSI standards for fall protection equipment. When used as a component in a personal fall arrest system, or a personal restraint system, the Palmer Safety harnesses provide workers with the full body harness system designed to allow the body to help absorb the impacts of a fall should one occur.
  • 🧰 ADJUST WITH EASE - The fall protection body harness has 5 easily accessible adjustment points to ensure a comfortable fit a wide range of body types properly and safely. The dorsal D-ring for fall arrest, hip D-rings, heavy duty back support/positioning pad with removable tool belt, tongue buckle leg straps. Quick connect chest. Palmer Safety Full Body Safety Harness are designed for use by person with a combined Weight (clothing, tools, etc.) of 130 – 310 lbs. (59 – 140 kg)
  • 🧰 RELIABLY DURABLE - We provide fall protection gear that is built to last and can keep you out of harm’s way. The body harness is build with these physical parameters: Webbing: Polyester, Width: 1.73 in, Breaking Strength: 5000 lbs., Stitching Thread: High-tenacity polyester | Metal Component: Alloy Steel, Finish: Silver or Golden Yellow Galvanized | Weight: 5.28 lbs.
  • 🧰 COMPLIANT WITH SAFETY STANDARDS - We take working environment safety very seriously. That’s why our fall protection fall arrest harness complies with OSHA standards as well as meet in some cases exceed ANSI/ASSE Z359.11-2014. A10.32-2012 fall protection requirements. It’s a must-have for safe and fully-compliant work operations in Ports, Highways, Government buildings, Military Installations, Residential & Commercial Construction, Roofing.
  • 🧰 WHY PALMER SAFETY: Palmer Safety is a full service fall protection and safety training organization with offices in New Orleans, Houston, New York, and Los Angeles. We believe knowledge is power and, in the case of fall protection, can mean life or death. We offer the complete package: high quality products serviced by experienced personnel with industry knowledge. Put safety on top of your agendas. Add the Palmer Safety Fall Protection 3D Full Body Safety Harness to your cart today!
BESTSELLER NO. 4 in 2021

Guardian Fall Protection (Qualcraft) 00815 BOS-T50 Bucket of Safe-Tie with Temper Anchor, 50-Foot Vertical Lifeline Assembly and HUV

Guardian Fall Protection (Qualcraft) 00815 BOS-T50 Bucket of Safe-Tie with Temper Anchor, 50-Foot Vertical Lifeline Assembly and HUV
  • Perfect set for home fall protection gear
  • Universal harness HUV (01101) with 5 points of adjustment for added comfort.Body Wear Velocity Harness (S - L)
  • Vertical Lifeline Assembly with Shock Pack, and permanently attached Positioning Device with 18" lanyard extension to keep device within reach
  • 1 Heavy Duty Temper Reusable Anchor (00455)
  • A Guardian Fall Product
BESTSELLER NO. 5 in 2021

Muddy Magnum Pro Harness Black, UNITS

Muddy Magnum Pro Harness Black, UNITS
  • Light Weight Padded Nylon
  • Cam Leg buckles
  • Magnum Harness, Lineman's Belt, Tree Strap, Suspension Relief Strap
  • One Size Fits Most
  • WEIGHT RATING: 300 lbs.
BESTSELLER NO. 6 in 2021

Weanas Thicken Climbing Harness, Protect Waist Safety Harness, Wider Half Body Harness for Mountaineering/Fire Rescuing/Rock Climbing/Rappelling/Tree Climbing

Weanas Thicken Climbing Harness, Protect Waist Safety Harness, Wider Half Body Harness for Mountaineering/Fire Rescuing/Rock Climbing/Rappelling/Tree Climbing
  • Beginner's Harness: CE Certified,, but not certified for indoor climbing.Harness weight limited: 300KG,breaking strength-22KN. Half body climbing harness, traditional buckle, harness construction distributes pressure to keep you comfortable while climbing Comfortable wear is a good companion for your outdoor sports
  • Size: Fits waist strap 20" to 46"(51cm to 118cm), Leg strap 15" to 27" (38cm to 70m), one size fits for person. Well on all ages and can be shared by the whole family. Easy to operate, wear and remove
  • Durable Bearing Loop: High load bearing, all the connections and webbing are very sturdy with reinforced ends to bear your weight and protect your safety at all times
  • Wide Range of Uses: Perfecting for mountaineering, tree climbing, indoor climbing, rock climbing, outward band, fire rescue, working on the higher level etc. Comfortable cushioning to ensure safety during rock climbing
  • Premium Quality Half Body Climbing Harness, Thick, Wider and Safety Waist Belt great for women, men and older children. If you are not satisfied with this product or if you have any question, please feel free to contact us
BESTSELLER NO. 7 in 2021

KwikSafety (Charlotte, NC) SUPERCELL Safety Harness | ANSI OSHA Full Body Personal Fall Protection | Dorsal Ring Side D-Rings Grommet Tongue Buckle Straps Tool Lanyard Construction Tower Roofing

KwikSafety (Charlotte, NC) SUPERCELL Safety Harness | ANSI OSHA Full Body Personal Fall Protection | Dorsal Ring Side D-Rings Grommet Tongue Buckle Straps Tool Lanyard Construction Tower Roofing
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
BESTSELLER NO. 8 in 2021

Palmer Safety Fall Protection Universal Body Safety Harness w/Detachable 6' Single Leg Lanyard I Shock Absorber Lanyard I OSHA/ANSI Fall Arrest KIt I Ideal for Industrial & Construction Use (Yellow)

Palmer Safety Fall Protection Universal Body Safety Harness w/Detachable 6' Single Leg Lanyard I Shock Absorber Lanyard I OSHA/ANSI Fall Arrest KIt I Ideal for Industrial & Construction Use (Yellow)
  • 🧰 WORK SAFELY - Palmer Safety Harnesses are designed and tested to comply with applicable OSHA and ANSI standards for fall protection equipment. When used as a component in a personal fall arrest system, or a personal restraint system, the Palmer Safety harnesses provide workers with the full body harness system designed to allow the body to help absorb the impacts of a fall should one occur.
  • 🧰 ADJUST WITH EASE - The fall protection body harness has 3 easily accessible adjustment points to ensure a comfortable fit a wide range of body types properly and safely. The dorsal D-ring for fall arrest with buckle leg straps and is compatible for a quick and safe connection with any manufacturer’s ANSI compliant fall protection equipment. Palmer Safety Full Body Safety Harness are designed for use by person with a combined Weight (clothing, tools, etc.) of 130 – 310 lbs. (59 – 140 kg)
  • 🧰 RELIABLY DURABLE - We provide fall protection gear that is built to last and can keep you out of harm’s way. The 6’ lanyard with personal absorber has these physical parameter: Webbing: Polyester, Width: 0.98 in, Breaking Strength: 6000 lbs., Stitching Thread: High-tenacity polyester | Metal Component: Alloy Steel, Finish: Silver or yellow golden galvanized | Weight: 2.72 lbs
  • 🧰 COMPLIANT WITH SAFETY STANDARDS - We take working environment safety very seriously. That’s why our fall protection fall arrest kit complies with OSHA standards as well as meet in some cases exceed ANSI/ASSE Z359.11-2014. A10.32-2012 & Z359.13-2013 fall protection requirements. It’s a must-have for safe and fully-compliant work operations in Ports, Highways, Government buildings, Military Installations, Residential & Commercial Construction, Roofing.
  • 🧰 WHY PALMER SAFETY: Palmer Safety is a full service fall protection and safety training organization with offices in New Orleans, Houston, New York, and Los Angeles. We believe knowledge is power and, in the case of fall protection, can mean life or death. We offer the complete package: high quality products serviced by experienced personnel with industry knowledge. Put safety on top of your agendas. Add the Palmer Safety Fall Protection Fall Arrest Combo Kit to your cart today!
BESTSELLER NO. 9 in 2021

KwikSafety (Charlotte, NC) THUNDER 3D Ring Safety Harness (Pass Through Connectors) OSHA ANSI Industrial Full Body Fall Protection Personal Equipment Construction Carpenter Scaffold Contractor

KwikSafety (Charlotte, NC) THUNDER 3D Ring Safety Harness (Pass Through Connectors) OSHA ANSI Industrial Full Body Fall Protection Personal Equipment Construction Carpenter Scaffold Contractor
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
BESTSELLER NO. 10 in 2021

Hunter Safety System X-1 Treestand Hunting Harness, Small/Medium

Hunter Safety System X-1 Treestand Hunting Harness, Small/Medium
  • STAY SAFE THROUGHOUT THE HUNT: No dangerous dangling straps or confusing weave-through buckles
  • LIGHTWEIGHT MEETS PHENOMENAL COMFORT: Weighs only 2.5 lbs; incredibly lightweight which allows for all-day comfort and mobility
  • VERSATILE ENOUGH FOR ALL-SEASON USE: Can be easily worn over lightweight clothes or underneath cold-weather gear for all-season use
  • ACCESSORIES INCLUDED: Primary Treestrap, Suspension Relief Strap, Safe-Use Instructions, and DVD all included
  • 5 YEAR WARRANTY: Strongest in the industry
  • Size: S/M (100 -175 lbs.) , L/XL (175 -250 lbs.), 2X/3X + $10.00 (250 - 300 lbs.)

8 More Questions Answered

Do safety harnesses expire?

There is no such thing as a predetermined or mandated expiration date on fall protection harnesses. Neither OSHA nor ANSI have current codes or standards that set a specific time period for taking a harness out of service. Even most manufacturers will not suggest how long a harness will last.

What does death by suspension mean?

So what exactly is Suspension Trauma? Suspension Trauma (also called Orthostatic Intolerance, or Harness Hang Syndrome) is the loss of consciousness due to a victim being held upright with limited movement for a period of time, which can rapidly lead to death if not properly recognized and treated.

How long does it take to die from suspension trauma?

It is difficult to put a timeline on deaths, however from research it is clear that death can result in as little as 10 minutes, more typically between 15 – 40 minutes post-suspension. Death is more rapid with existing injuries, but can happen to anyone.

How does safety harness work?

In addition to distributing force, the design of a full body harness serves to keep an employee upright in a fall. This allows a deceleration device to properly deploy, but also keeps the spine vertical, which is the position in which it can best absorb compressive forces of a fall.

What is the maximum height you can work off a ladder?

There is no maximum height for using a ladder. However, where a ladder rises 9 metres or more above its base, landing areas or rest platforms should be provided at suitable intervals.

When should you wear a full body harness OSHA?

Page 1 of 2 When using personal fall protection equipment, wear a full body harness if you are at risk of falling. A full body harness consists of straps passed over the shoulders, across the chest, and around the legs.

What is the maximum height you can work at without fall protection?

The purpose of the regulations is to prevent incidents at workplaces involving falls of more than 2 metres, and to prevent or reduce injury resulting from those falls.

What is the safest dog car harness?

Read on to find out more about it and nine other great car harness options.
  • Sleepypod ClickIt Sport Crash-Tested Car Dog Harness. ...
  • PetSafe Happy Ride Dog Safety Harness. ...
  • Ruffwear Load Up Vehicle Restraint Harness. ...
  • 4×4 North America Original Allsafe Harness. ...
  • Mighty Paw Vehicle Safety Harness.