Best Heavy Duty Caster Wheels

Category: heavy duty casters 👁 271 👍 34 ★★★★☆4.4

We recommend adding a 33% addition to the total weight of the load for safety. So, for a 4-wheeled cart that weights 3,000 lbs., the safety factor would equal 3,990 lbs. Dividing this weight by 4 gives a caster with a rating of 1,000 lbs per caster, which is recommended.

One way or the other, how do I choose a caster wheel?

To determine the load capacity for each caster, divide the combined weight of the equipment and maximum load by the number of casters to be used. This is the load that each caster and wheel must support. Always select a caster and wheel that are rated for a capacity greater than the calculated load per caster.

As a result, what kind of casters do I need? Use large casters if you have to drive over cables. Four swiveling wheels provide the most maneuverability. If you have two swivel and two fixed wheels, you will still have problems moving the casters in some directions. Use casters with locking wheels to keep the unit from rolling.

By no means, how much weight can 4 caster wheels hold?

Here is how it works: For the Shepherd Baron caster (highlighted below), the identified dynamic load per caster is 70 pounds to 80 pounds. Using 80 pounds, a four caster chair can hold a dynamic load of 320 pounds, but a five caster chair can hold a dynamic load of 400.

What is the difference between a wheel and a caster?

The wheel is limited in that it only spins on a single axis. It can only roll in one direction at a time. Casters incorporate wheels into their designs, but they are a bit more sophisticated. A caster includes the mounting system that holds the wheel in place.

BESTSELLER NO. 1 in 2021

D&L 4 Inch Plate Swivel Casters Wheels 1800lbs Heavy Duty Casters with Brake Polyurethane Dual Locking Casters Set of 4 Red DL-I4-001

D&L 4 Inch Plate Swivel Casters Wheels 1800lbs Heavy Duty Casters with Brake Polyurethane Dual Locking Casters Set of 4 Red DL-I4-001
  • SCREWS INCLUDE AND HEAVY DUTY:360 degree rotation to facilitate rotation at any angle,Heavy duty: can withstand a single 450lb, a total of 1800lb weight
  • SAFETY:The 4 wheels have brakes,ensuring the safety of people and goods at any time and at any angle
  • CAPACITY:550lbs each. Plate Size:3.74" (95mm) x 2.6" (66mm).Hole center to hole center:2.93" (74.5mm) x 1.8" (45mm). Mounting hole dimensions: 0.33" (8.5mm) x 0.46" (11.9mm)
  • Wheel Dia.:4" (100mm). Wheel Width: 1.25" (32mm). Wheel Material: Polyurethane. Overall Height: 5.15" (131mm
  • WARRANTY:2 years warranty, quality problems, only change, no maintenance
BESTSELLER NO. 2 in 2021

2" Swivel Caster Wheels with Safety Dual Locking and Polyurethane Foam No Noise Wheels, Heavy Duty - 150 Lbs Per Caster (Pack of 4)

2
  • HIGH QUALITY DUAL LOCKING- The wheels made of the popular Non-Marking polyurethane rubber type, very quiet running, absorbs shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety.
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible, Is good for transporting light furniture and displays quietly and safely.
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 600 lbs capacity for the pack of 4, Bearing Heavy Duty.
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc.
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we'll give you a 100% refund within 90 days of purchase.
BESTSELLER NO. 3 in 2021

4" Swivel Caster Wheels with Safety Dual Locking and Polyurethane Foam No Noise Wheels, Heavy Duty - 300 Lbs Per Caster (Pack of 4)

4
  • HIGH QUALITY DUAL LOCKING- Made of non-marking polyurethane rubber, these caster wheels are very quiet while rolling, and absorb shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety.
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible. It’s good for transporting furnitures and displays quietly and safely.
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 1200 lbs capacity for the pack of 4, Bearing Heavy Duty.
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc.
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we'll give you a 100% refund within 90 days of purchase.
BESTSELLER NO. 4 in 2021

4" Plate Caster Wheels Set of 4 2200LB with Screw Safety Dual Locking and Polyurethane Foam No Noise Wheels,Heavy Duty - 550 Lbs Per Caster

4
  • SCREWS INCLUDE AND HEAVY DUTY:360 degree rotation to facilitate rotation at any angle,Heavy duty: can withstand a single 550lb, a total of 2200lb weight
  • SAFETY:The 4 wheels have brakes,ensuring the safety of people and goods at any time and at any angle
  • CAPACITY:550lbs each. Plate Size:3.74" (95mm) x 2.6" (66mm).Hole center to hole center:2.93" (74.5mm) x 1.8" (45mm). Mounting hole dimensions: 0.33" (8.5mm) x 0.46" (11.9mm)
  • Wheel Dia.:4" (100mm). Wheel Width: 1.25" (32mm). Wheel Material: Polyurethane. Overall Height: 5.15" (131mm
  • WARRANTY:2 years warranty, quality problems, only change, no maintenance
BESTSELLER NO. 5 in 2021

3 inch Heavy Duty Casters, Lockable Bearing Caster Wheels with Brake, Swivel Casters for Furniture and Workbench, Set of 4, Load 1200lbs (Free Screws and Spanner)

3 inch Heavy Duty Casters, Lockable Bearing Caster Wheels with Brake, Swivel Casters for Furniture and Workbench, Set of 4, Load 1200lbs (Free Screws and Spanner)
  • 🎄【Materials and Process Upgrading】- Thickened universal steel column, thickening plate and double support bearing. High strength stainless steel electrophoresis stand, wear resistant mute steel ball. Caster wheels are made of superior polyurethane with strong abrasion resistance, silent shock absorber, wearproof, no drag marks. And enhance the impact resistance of the whole castor. Free screws and a spanner from now on. Total Load Capacity-1200lbs.
  • 🎄【With Locking Brake】-3 inch casters. It comes pack of 4 wheels, It comes pack of 4 wheels, each wheel has a separate brake. The brake locks both the wheel and the swivel simultaneously, effective to stop and prevent the device from moving and hurting others.
  • 🎄【360 Degree Rotation Top Plate】- Easy to transform to any directions that you want, and spend little strength to move on.
  • 🎄【Save Strength and Widely Used】- Easy to move the table, seat or shelf or other things if they have caster wheels. Wear resistant and durable, non marking. Furniture casters, workbench casters can be used in both industrial and residential applications. Suitable for multiple scenarios, designed specifically for handling.
  • 🎄【WARRANTY】- 2 Years Warranty, Free Replacement - No Questions Asked.
BESTSELLER NO. 6 in 2021

SPACECARE Workbench Stepdown Caster, 600 Lbs Capacity Set of 4 Durable Heavy Duty Steel Wheels for Workbenches Tables and Equipments [New Version]

SPACECARE Workbench Stepdown Caster, 600 Lbs Capacity Set of 4 Durable Heavy Duty Steel Wheels for Workbenches Tables and Equipments [New Version]
  • 【DURABLE CONSTRUCTION】- The heavy duty wheel casters, constructed with durable solid steel and premium urethane wheels, which can move smoothly and easily support up to 600 lbs per set. The wear-resistant urethane wheels can work smoothly for heavy duty workbenches Tables and Equipments.
  • 【EASY OPERATION】- It just takes one foot to lift workbench table and equipment. Step on the pedal then lift the workbench to an fixed height. Pay attention NOT to step on the edge of outer side, just put your foot at the middle point of pedal(see image 5). The casters cannot work on rocky road, but it works well on smooth road.
  • 【360-DEGREE MANEUVERABILITY】- Equiped with 360-degree swivel bracket, the wheel can turn to any directions. Move the workbench, table, cabinet and equipment to the destination more easily and flexibly.
  • 【MOUNTING SCREWS INCLUDED FOR EASY INSTALLATION】- We offer 16 screws that is enough for installation, but it depends on you whether to install 24 screws or not. Better to make holes in workbench legs with a driller(not included) before installing casters.
  • 【ANTI-SLIP PEDAL】- The pedal is framed with powder coating and satin black finish, marked with anti-slip stripes on its surface which means anti-rust and more durable for use. Equipped with the wear-resistant urethane wheels can work easily.
BESTSELLER NO. 7 in 2021

D&L 5 Inch Plate Casters Wheels 1800lbs Heavy Duty Casters with Brake Polyurethane Dual Locking Casters Set of 4 Orange DL-I5-001

D&L 5 Inch Plate Casters Wheels 1800lbs Heavy Duty Casters with Brake Polyurethane Dual Locking Casters Set of 4 Orange DL-I5-001
  • SCREWS INCLUDE AND HEAVY DUTY:360 degree rotation to facilitate rotation at any angle,Heavy duty: can withstand a single 450lb, a total of 1800lb weight
  • SAFETY:The 4 wheels have brakes,ensuring the safety of people and goods at any time and at any angle
  • CAPACITY:550lbs each. Plate Size:3.74" (95mm) x 2.6" (66mm).Hole center to hole center:2.93" (74.5mm) x 1.8" (45mm). Mounting hole dimensions: 0.33" (8.5mm) x 0.46" (11.9mm)
  • Wheel Dia.:5" (125mm). Wheel Width: 1.25" (32mm). Wheel Material: Polyurethane. Overall Height: 6.18" (157mm)
  • WARRANTY:2 years warranty, quality problems, only change, no maintenance
BESTSELLER NO. 8 in 2021

3 inch Swivel Caster Wheels,Heavy Duty Plate Casters with Safety Brake Total Capacity 1000lbs (pack of 4)

3 inch Swivel Caster Wheels,Heavy Duty Plate Casters with Safety Brake Total Capacity 1000lbs (pack of 4)
  • STABLE CONSTRUCTION: Housing made of heavy steel for high load, the max capacity of 4 wheels is up to 1000lbs. These casters wheels are heavy duty enough for most applications, such as flight cases, mobile workstation, worktable, trolley.
  • SAFETY TOTAL LOCK: This brake simultaneously locks the wheel and the swivel, holding the equipment firmly in place to reduce accidents. This combination wheel brake and swivel lock is essential for safety in some applications, such as on worktables, tablesaws, medical equipment, and used on uneven floors.
  • SMOOTH AND SILENT: Thanks to double precision ball bearings which contribute to smooth mobility and low noise during movement, these swivel casters can keep smooth and silent even under heavy load. PVC material also will absorb shocks to keep low-vibration transport.
  • EASY STEERING: Equipped with 360 degree swivel head, caster wheels can respond immediately to changes in direction. These casters swivel on ball bearings to keep the wheel turning even under heavy loads. It allows you to work in a tight space or other environment where greater maneuverability is required.
  • QUALITY GUARANTEE: 1 years warranty, 30 days money back guarantee, free replacement, no questions asked.
BESTSELLER NO. 9 in 2021

4 Heavy Duty Caster Set 5" 6" 8" All Steel Wheels Rigid & Total Lock Brake (5": 2R + 2STL)

4 Heavy Duty Caster Set 5
  • 1. Top plate : 3-15/16" x 4-1/2"
  • 2. Diamether : 5" / 6" / 8"
  • 3. Tread Width : 2"
  • 4. Load Capacity : (5" : 1000 lbs/ea) / (6" : 1000 lbs/ea) / (8" : 1000 lbs/ea)
  • 5. Overall height : (5" : 6-1/2") / (6" : 7-1/2") / (8" : 9-1/2")
BESTSELLER NO. 10 in 2021

Steelex D2581 Swivel Heavy Duty Industrial Wheel, 8-Inch

Steelex D2581 Swivel Heavy Duty Industrial Wheel, 8-Inch
  • Black Rubber Knobby; Swivel
  • Wheels are 8 inches in diameter; 500 pounds weight capacity
  • Mounting plate measures 4-1/2 by 4 inches

13 More Questions Answered

How do you attach caster wheels?

To install plate-mount casters, simply position the caster, mark the mounting holes, and drill them. Then, attach the caster with nuts, bolts, and washers. To install the socket for a stem-mount caster, drill a hole the size of the socket's outside diameter straight into the bottom of the leg.

Are polyurethane wheels good?

Polyurethane tires are a popular choice in industrial applications because of their quietness in operation when compared to harder wheels such as steel or cast iron. The polyurethane acts as a shock absorber and helps cushion the ride. It also absorbs bumps from uneven terrain.

What is the difference between hard and soft casters?

What Are the Differences Between Soft and Hard Casters? Soft casters are softer than hard casters - more like a roller skate wheel rather than hard plastic - and prevent rolling out from under you and marring the floor. They're made for better use on hard flooring like wood or when a plastic chair mat is being used.

How do I know what size casters I need?

Place the ruler perpendicular to the length of the stem at the middle (not near the top or the ring). Most casters that have a grip ring stem have 7/16″ stem diameter. If the stem of your caster is 7/16″ diameter it will measure slightly less than the 1/2″ mark on the ruler.

How do you fix caster rims?

Where do locking casters go?

Locking casters on front, casters on rear, so you will have locking casters on the 36 in front section corners.

What are the best casters for carpet?

The correct choices for casters to use on carpeted floors are metal or hard nylon. A metal caster or one made out of hard nylon will cut through even the thickest pile. Mobility will not be an issue, and caster tracks or indentations can be 'removed' at any time with a quick brushing.

How do you calculate caster load?

One of the primary considerations for choosing casters is the “load,” which refers to how much weight each caster will support. Calculating the load you need for each caster or wheel is simple: just divide the weight of the furniture, equipment, or cargo by the number of casters.

What is wheel load capacity?

Wheel Load – this is the maximum load that the wheel is designed to carry. The wheel load is determined by taking 50% of the heaviest axle rating of the vehicle (GAWR – gross axle weight rating). Example; if your heaviest axle weight rating is 3000 lbs then your wheel load requirement would be 1500 lbs.

How do you calculate load capacity?

Take the total weight of the load and divide this by the number of legs supporting the load. For example, assume a 2,000 pound load is to be supported by 2 legs of a sling. The above will give a total minimum weight on each leg of the sling of 2,000 pounds divided by 2 legs or 1,000 pounds.

Why do caster wheels wobble?

If the caster is not aligned well with the ground, it will flutter. Misalignment can be caused if the installation is improper or the legs of the caster have been damaged or bent. In most cases, usage of the caster wheel at high speeds will cause it to flutter.

Is a caster a wheel?

A caster (or castor) is an undriven, single, double, or compound wheel that is designed to be attached to the bottom of a larger object (the "vehicle") to enable that object to be moved.

Why are caster wheels offset?

A lever of a small arm requires more energy to pull than a longer lever. In a similar way, a longer offset makes it easier to “swivel out” the caster in the direction of travel. ... By increasing the offset and therefore reducing the swivel force, less exertion is required to swivel the caster out.