Best Fiber Optic Splicing Machine

Category: fiber optic splicing machine 👁 438 👍 23 ★★★★☆4.5

Splicing fibers is commonly used to rejoin fiber optic cables when accidentally broken or to fuse two fibers together to create a fiber that is long enough for the required cable run. There are two accepted methods of splicing fibers: Mechanical splicing. Fusion splicing.

Still further, how much does a fusion splicer cost?

Even the cheapest fusion splicer will cost nearly $2,900 (FS-F600 Fusion Splicer from FS.COM) more than the most expensive crimp kit. Not counting the initial start-up costs, splices will run anywhere from $7.20 to $8.25 per splicing, which is much lower than the pre-terminated connector.

Else, how much does it cost to splice fiber? At $60-120/hr, a fusion splice in a drop location will cost $30-$60 labor plus the splicing cost. A mechanical splice would also require cable prep time, plus the $5 - $12 connector price. Even less expensive than that is using pre-terminated fiber cable.

All the same, what is a fusion splicer used for?

As we said above, fusion splicer is the machine used to weld (fuse) two optical fibers together. This process is called fusion splicing. The fiber ends are prepared, cleaved, and placed in alignment fixtures on the fusion splicer.

How long does it take to repair a fiber optic line?

Representatives of fiber optics maintenance companies that would be involved in the repairs said that the severed line could be completely restored within four hours once work began.

BESTSELLER NO. 1 in 2021

D YEDEMC SM&MM Automatic FTTH Fiber Optical Welding Splicing Machine Optical Fiber Fusion Splicer Ai-8C Splicing 6S Heating15S

D YEDEMC SM&MM Automatic FTTH Fiber Optical Welding Splicing Machine Optical Fiber Fusion Splicer Ai-8C Splicing 6S Heating15S
  • 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable;Splice Loss:0.025dB(SM)、0.01dB(MM)、0.04dB(DS/NZDS);Fiber diameter:Cladding Diameter:80-150μm、Coating Diameter:100-1000μm;Fiber Cleave Length:Coating less than 250µm:8-16mm、Coating less than 250-1000µm:16mm.
  • With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnifications;Six motors Core alignment,fusion splicer core to core 6 motors 6 seconds splicing.
  • languages :English、 French、Spanish、Portuguese、Polish、 Arabic、Russian, etc.
  • Through the phone app,splicing is easy to operate.You can learn various operration in the APP,as well as update the mobile app and connect to the machine to synchronizes update.The mobile phone is not needed when splicing.The mobile APP can be used to turn on/off the machine menu,ARC calibration ,remote control,smart lock,etc.
  • Lifetime Friendly Customer Service,if have problem,pls contact us.
BESTSELLER NO. 2 in 2021

SPEEDWOLF 5" LCD Double Heating Core Alignment Optical Fiber Fusion Splicer Portable FTTH Optic Fiber Splicing Machine for SM/MM/DSF/NZDSF/ED Fibers with Fiber Cleaver and 6XElectrodes

SPEEDWOLF 5
  • 【High Accuracy and Low Splice Loss】- Double V-groove design, Dual CMOS cameras, 200x zoom imaging System,Auto checks fiber end-face technology, temperature and pressure compensation,high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss----SMF/BIF: ≤0.02dB(typ.); MMF: ≤0.01dB(typ.); DSF/NZDSF/EDF: ≤0.04dB(typ.); Return Loss: >60dB.
  • 【Wide compatibility】--SPEEDWOLF FS18-D is compatible with ITU-T SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) ED fiber for telecommunications, radio and television, railway, electric power, military, research institutes for optical fiber communication construction and maintenance, and it is equipped with High precision 3-in-1 holder (250μm/900μm/patch cord/FTTx indoor fiber etc). FS18-D is perfect for FTTH installation and maintenance.
  • 【Easy to use and Efficient work】--Auto splicing, auto arc optimization, auto heating function, Auto checks fiber end-face, calibrate position of splicing, calculate splicing loss and temperature and pressure compensation so on;Built-in counter to warn replace electrode; Ready-package battery with electric quantity indicator, convenient carrying and change; Between X/Y single screen and X&Y easily switch; splicing time less than 9s, and heating time less than30s (adjustable).
  • 【Portable Design】--Very Small size and light weight--only 5.2(L)x6.0(W)x5.9(H)Inch and Only 1.3kg/2.7lb(without battery) or 1.6kg/3.4lb (with battery); High strength portable straps design is convenient for hanging and operating;5.1” outdoor-enhanced TFT LCD display with X/Y / X / Y Auto turn-over function, FS18-C Built in 10.8V 5200mah Lithium battery,It can provide 300+ (splice + heating) circles;Wind, sand and dust prevention, waterproof, aseismatic design adapt to the outdoor environment.
  • 【Worry-Free WARRANTY】--60-day money-back guarantee, 5 years warranty and Lifetime Friendly Customer Service.
BESTSELLER NO. 3 in 2021

High-tech Single COMWAY C6 Fiber Fusion Splicer Welding Splicer USA Fiber Optic Splicing Machine

High-tech Single COMWAY C6 Fiber Fusion Splicer Welding Splicer USA Fiber Optic Splicing Machine
  • Package Including:1. C6 main body 2. High capacity battery 3. AC adapter 4. Extra electrode 5. Cooling tray 6. AC adapter cable 7. DC adapter cable 8. USB cable 9. Hand strap 10. Shoulder strap 11. Carrying case
  • Core to Core alignment system Most suitable design for FTTx, LAN, backbone, factories, long-haul installations 1 sec. bootup time, 6 sec. splicing time Enhanced Outdoor Color screen display Long life battery with 7800mAh high capacity battery, more than 300 times splices and heats
  • Shock resistance: 95cm drop on 5 faces Easy to change electrodes and fiber holder Auto-start shrink sleeve oven feature Easy maintenance - Easy electrode replacement /mirror free alignment System Fast and easy to use, no need to study.
  • Easy Software upgrade via the internet High speed USB Port. Support remote interactive maintenace.Using PC to connect to maintenance center Splicer is compatible with the Seikoh Giken and Diamond Spliceon- connector (SOC) CE, RoHS compliant
BESTSELLER NO. 4 in 2021

ORIENTEK T45 Fusion Splicer Core alignment Fiber Splicing Machine Fiber Optic Welding Machine

ORIENTEK T45 Fusion Splicer Core alignment Fiber Splicing Machine Fiber Optic Welding Machine
  • 【Portable Design】---Very Small size and light weight, the splicer is easy to carry and can be lift by one hand.
  • 【Graphical interfaces and touch screen】---Orientek T45 uses entirely new GUI and touch screen in design. Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces.
  • 【High Accuracy and Low Splice Loss】---7s fast splicing, 18s highly efficient heating. Four high precision motors. Auto checks fiber end-face technology, temperature and pressure compensation,high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss.
  • 【All-in-one fixer】---The all-in-one fixture meet fusion demands of multiple optical fibers, jumpers and rubber-insulated wires with a cladding diameter of 80~150μm.
  • 【Intelligent heat shrink】---A detection unit is embedded in the heater. The heating function will only be enabled when the protection sleeve is put in the heater, to avoid mishandling.
BESTSELLER NO. 5 in 2021

ORIENTEK Core Alignment Fusion Splicer T45 Optical Welding Machine Fiber Splicing Machine + Optic Power Meter by FEDEX/UPS/DHL

ORIENTEK Core Alignment Fusion Splicer T45 Optical Welding Machine Fiber Splicing Machine + Optic Power Meter by FEDEX/UPS/DHL
  • 【Graphical interfaces and touch screen】---Orientek T45 uses entirely new GUI and touch screen in design. Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces.
  • 【High Accuracy and Low Splice Loss】---7s fast splicing, 18s highly efficient heating. Four high precision motors. Auto checks fiber end-face technology, temperature and pressure compensation,high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss
  • 【Intelligent heat shrink】---A detection unit is embedded in the heater. The heating function will only be enabled when the protection sleeve is put in the heater, to avoid mishandling.
  • 【Pluggable lithium-ion battery of large-capacity】---The built-in pluggable lithium-ion battery of large capacity can answer working demand lasting all day long (typical 220 counts of splicing and heating cycles).
  • 【Ceramic V-groove and ceramic presser foot】---Ceramic V-groove with high precision brings you convenient and accurate placement of optical fibers and makes cleanup easy.
BESTSELLER NO. 6 in 2021

D YEDEMC SM&MM Automatic Intelligent Optical Fiber Fusion Splicer Optical Fiber Welding Splicing Machine 4.3 Inch Touch Screen Display & Fiber Cleaver Kit …

D YEDEMC SM&MM Automatic Intelligent Optical Fiber Fusion Splicer Optical Fiber Welding Splicing Machine 4.3 Inch Touch Screen Display & Fiber Cleaver Kit …
  • Splicing Mode: Manual, Half Auto, Auto; Typical Splicing time:7s(SM G652 Quick Mode) ; Typical heating time:18sec;
  • Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.Average Splicing Loss:SMF:0.02, MMF:0.01dB, DSF:0.04dB,NZDSF:0.04dB
  • Precise fiber core alignment, ultra-low fiber fusion splicing consumption 7s fast fusion splicing.320 times image magnification.300 groups of fusion splicing modes.Dual-direction splicing, automatic splicing, intelligent pyrocondensation
  • Small in Shape, Light in Weight: 1.95kg with battery, suitable for field work.6800mah Li-ion Battery,220 cycles splicing and heating, 3 hours charging time( splicing and charging at same time),Cycling charge 300-500 times, easy to replace battery
  • Lifetime Friendly Customer Service,if have problem,pls contact us.
BESTSELLER NO. 7 in 2021

D YEDEMC SM&MM Automatic Fiber Optical Fusion Splicer Integrate Visual Fault Locator and Optical Power Meter (Ai-9) & Fiber Cleaver Kit (Green_Box_Ai-9)

D YEDEMC SM&MM Automatic Fiber Optical Fusion Splicer Integrate Visual Fault Locator and Optical Power Meter (Ai-9) & Fiber Cleaver Kit (Green_Box_Ai-9)
  • 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable;Splice Loss:0.025dB(SM)、0.01dB(MM)、0.04dB(DS/NZDS);Fiber diameter:Cladding Diameter:80-150μm、Coating Diameter:100-1000μm;Fiber Cleave Length:Coating less than 250µm:8-16mm、Coating less than 250-1000µm:16mm.
  • Built-In power meter (Wavelength 850nm/1300nm/1310nm/1490nm/1550nm/1625nm); Built-in Visual Fault Locator:Power:15mw,2hz flashing And Constantly Bright Mode.
  • With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnifications;5s fast splicing 15s fast heating.Once splicing reaches to 50,000 times free replacement a new machine
  • Through the phone app,splicing is easy to operate.10 Languages to switch freely :English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic
  • Lifetime Friendly Customer Service,if have problem,pls contact us.
BESTSELLER NO. 8 in 2021

D YEDEMC SM&MM Automatic Intelligent Optical Fiber Fusion Splicer Optical Fiber Welding Splicing Machine (Ai-9) & Fiber Cleaver Kit …

D YEDEMC SM&MM Automatic Intelligent Optical Fiber Fusion Splicer Optical Fiber Welding Splicing Machine (Ai-9) & Fiber Cleaver Kit …
  • 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable;Splice Loss:0.025dB(SM)、0.01dB(MM)、0.04dB(DS/NZDS);Fiber diameter:Cladding Diameter:80-150μm、Coating Diameter:100-1000μm;Fiber Cleave Length:Coating less than 250µm:8-16mm、Coating less than 250-1000µm:16mm.
  • Built-In power meter (Wavelength 850nm/1300nm/1310nm/1490nm/1550nm/1625nm); Built-in Visual Fault Locator:Power:15mw,2hz flashing And Constantly Bright Mode.
  • With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnifications;5s fast splicing 15s fast heating.Once splicing reaches to 50,000 times free replacement a new machine
  • Through the phone app, splicing is easy to operate.10 Languages to switch freely :English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic
  • Lifetime Friendly Customer Service,if have problem,pls contact us.
BESTSELLER NO. 9 in 2021

ORIENTEK T45 FTTH Fiber Optic Fusion Splicer Machine Core Alignment Fusion Splicing Machine 7sec Splice Time 250μm fiber, 900μm fiber, flat cable, jump cables w/Fiber Cleaver+Optic Power Meter

ORIENTEK T45 FTTH Fiber Optic Fusion Splicer Machine Core Alignment Fusion Splicing Machine 7sec Splice Time 250μm fiber, 900μm fiber, flat cable, jump cables w/Fiber Cleaver+Optic Power Meter
  • 7s fast splicing, 18s highly efficient heating. Four high precision motors. Auto checks fiber end-face technology, temperature and pressure compensation,high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss
  • Compatible cable/fiber: 0.25mm/0.9mm/3.0mm/flat/drop cable
  • Languages: English. French. Portuguese. Spanish
  • 4.3-inch high definition capacitive touch screen
  • Electrodes: 4,000 times spliciling without ex- change.Led lighting,easy to use in dim environment.
BESTSELLER NO. 10 in 2021

A 80S FTTH Fiber Optic Welding Splicing Machine Optical Fiber Fusion Splicer with Fiber Cleaver Kit, Fusion Splicer Automatic Focus Function

A 80S FTTH Fiber Optic Welding Splicing Machine Optical Fiber Fusion Splicer with Fiber Cleaver Kit, Fusion Splicer Automatic Focus Function
  • HIGH-PRECISION IN SHORT TIME: The high-precision fusion splicer, with high-speed image processing technology and special precision positioning technology, can complete the whole process of fiber fusion splicing automatically in 9 seconds
  • CONNECTION OD OPTICAL FIBERS: This machine is mainly used for the connection of optical fibers, which can be further connected with ordinary optical fiber cables, jumpers and multiple single-mode, multi-mode and dispersion-shifted quartz optical
  • CONVENIENT AND PORTABLE TO USE: Characterized by light weight, easy to carry and convenient to operate, fast splicing speed and low loses, it is especially suitable for optical fiber and cable projects, maintenance scientific research and teaching in telecommunications, radio and television, railway, petrochemical, electric power, military and public security and other communications fields
  • GOOD QUALITY: Fibers with a cladding diameter of 50um-150um. Keep it clean and protect it against strong vibrations and shocks. Lighting is convenient for optical fiber installation in the evening
  • VIP SERVICE: As a reliable seller, we always try our best to provide good quality products as well as excellent service to our customers, your trust and business is that important to us. If you are not 100% satisfied with the quality of the product, pls feel free to contact us and let us know about the issue, you will be assisted ASAP, customer satisfaction is on our top priority

8 More Questions Answered

Can you splice multimode fiber to single mode fiber?

Coupling a multimode fiber to a single-mode fiber will cause about 20 dB loss. Connecting a 62.5 fiber to a 50 micron core fiber will cause 2 to 4 dB loss, depending on the type of source (laser or LED). In any case, it can be enough loss to prevent network equipment from working properly.

What is the cheapest form of fiber splicing?

Therefore, for contractors who seldom splice, mechanical splicing is the inexpensive option. As the frequency of splicing increases, users of mechanical splicing will use more money since a mechanical splice is a device left with the customer while a fusion splicer is a tool that remains in the contractor's toolkit.

What is the best fusion splicer?

Best Fusion Splicer
  • Best Budget: Mophorn Fusion Splicer with Automatic Focus.
  • Best Premium: Fujikura New Model FSM-70S+ Fusion Splicer.

How much does a fiber tech make?

Find out what is the average Fiber Optic Technician salary Entry level positions start at $35,100 per year while most experienced workers make up to $77,594 per year.

What are the disadvantages of fiber optic cable?

Low power—Light emitting sources are limited to low power. Although high power emitters are available to improve power supply, it would add extra cost. Fragility—Optical fiber is rather fragile and more vulnerable to damage compared to copper wires.

What equipment is needed for fiber optic Internet?

At its most basic level, fiber internet is comprised of thin pieces of glass that send and receive the internet signal. The glass carries beams of light that transmit the data. This state-of-the-art method affects what equipment fiber-optic service requires, including cables, modems and routers.

Why is fiber optic cable so expensive?

The fiber cable itself is a commodity, costs no more than a couple of dollars a meter. Fiber deployments are expensive largely because of labor, Right of Way fees and make ready costs. When labor and permits are not an issue, fiber is super affordable.

Can you fusion splice multimode fiber?

Virtually all singlemode splices are fusion. Multimode fibers can be harder to fusion splice as the larger core with many layers of glass that produces the graded-index profile are sometimes harder to match up, especially with fibers of different types or manufacturers.