How to choose the best sealer for stamped concreteThe primary type of sealer used for exterior stamped concrete flatwork is a solvent- or water-based acrylic. Acrylic sealers are easy to apply, economical, and most important, breathable, allowing moisture in the slab to escape.
Whatever the case may be, what is the best concrete sealer for new concrete?
Epoxy concrete sealers are the most durable, making them good for sealing garage floors and high-traffic retail environments. Softer acrylic sealers, which require a sacrificial floor wax, are more affordable and popular for residential concrete floors, including basements.
Still, how often do you have to seal stamped concrete? every 2 to 3 years
For good measure, what do you use to seal a stamped concrete patio?
Is it OK to power wash stamped concrete?
If water and mild detergent are not effective, you can use a pressure washer to remove tough stains from a stamped concrete surface. Pressure washing can help remove tire marks, leaf stains, and grease spots. Try renting a pressure washer at your local hardware store.
100% pure acrylic, high performance lower odor solvent sealer
Produces a semi gloss "Wet Look" to just about any type of subtrate
Highly durable for a fraction of the cost of Urethane & Epoxy sealers.
Non-yellowing formula (Doesn't yellow the surface in time)
Lower odor than most solvent based sealers on the market
BESTSELLER NO. 2 in 2021
Stamped Concrete Sealer, 1 Gal - Clear, Water-Based, Semi-Gloss Sealer for Decorative Concrete Surfaces
Do It Yourself - Easy to Apply With a Paint Roller, Dries Quickly
Clear Concrete Sealant Leaves an Attractive, Durable, Semi-Gloss Finish
Protects Against Color Fade on Stained Concrete, Stamped Concrete Or Patio Paver Floors
For Both Interior & Exterior Use - Can Be Applied Over Previous Concrete Sealer Applications
Eco-Friendly, Water-Based Formula Is Easy to Cleanup and Safe for Surrounding Vegetation
BESTSELLER NO. 3 in 2021
5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer
The Armor AR350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish.
The Armor AR350 is manufactured in the US and made from non-recycled resins.
The Armor AR350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer.
The Armor AR350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting.
The Armor AR350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat.
BESTSELLER NO. 4 in 2021
All Purpose Concrete, Brick & Stone Sealer, Clear Penetrating Water Repellent for Porous, Exterior, Brick, Concrete, Stone, Cultured Stone, Sandstone, Limestone & Granite Siloxane Sealer, 1 Gallon
Clear, Water Repellent Protection for All Exterior, Porous Masonry & Concrete Surfaces Including Concrete, Brick, Natural Stone, Sandstone, Limestone, Cultured Stone (Stone Veneer/Manufactured Stone), Granite, and More
Waterproofs and Protects Masonry & Concrete Surfaces from Water Damage & Freeze/Thaw Damage
100% Breathable - Doesn't Form a Film, Allows Trapped Moisture to Escape Which Prevents Pitting, Cracking & Delaminating
Water-Based/Eco-Friendly - Soap & Water Cleanup, Low Odor
5 Year Warranty on Vertical Concrete & Masonry Surfaces
BESTSELLER NO. 5 in 2021
5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer
Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics.
Durable, long lasting. Stands up to abrasion, UV rays, hot tire pick up, hot and cold temperatures.
Long lasting high gloss finish provides up to 2-5 years of life on a two coat application before the need for a recoat. Will bring out color in dull and faded surfaces.
Can be used on poured concrete, stamped concrete, concrete pavers, aggregate, and more.
Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic.
BESTSELLER NO. 6 in 2021
Concrete Sealer 1 Gallon (Covers 1500 Sq Ft) â€“ Acrylic Emulsion Formula | Made in USA - Clear or Wet Sealant for Indoor/Outdoor Surfaces - Perfect for Concrete | Driveways | Garages | Basements
BEST VALUE ON AMAZON – The Essential Values Concrete & Stone Sealer Finish is The Best Concrete Sealer for Protecting and Finishing Driveways, Sidewalks, Garage Floors, Patios, and Other Concrete Surfaces! Not Limited to Outdoors Alone, Safe for Use Indoors: Pavers, Cinder Blocks, Bricks, Chimney’s and Fireplaces!
IMPRESS YOUR NEIGBORS – Not like Other Cheap Acrylic Sealers That Do Not Provide a Full Seal! With Essential Values Concrete & Stone Sealer Finish, Become the Driveway of the Neighborhood for Years to Come While Safe & Eco-Friendly ***Approved by the DOT***. Made from the Markets Highest Quality of Siloxane Ingredients, You Will Not Be Disappointed!
KEEPS MOSITURE OUT – Keep Your Driveway Looking New and Protect it and other Concrete & Stone Finishes from Spalling, Degrading, Pitting or Cracking! Protect your Investment and Save More with Your Essential Values Protectant Seal – Designed to Tolerate and Protect Surface from Salts, Ions, Stains, Mildew, Fungus, & Freezing and Thawing
EASY TO APPLY – Simple to Use with A Beautifully Attractive Clear Finish! Covers up to 1500 SQUARE FOOT for Standard Care! If WET LOOK / HIGH GLOSS Desired, Apply 3 Coats and Allow 1 Hr To Dry Between Coats! ****For Best Results, Surfaces Need to Be Fully Cleaned from Dirt, Dust, Grease, Oil & Efflorescence****
PROUDLY MADE IN USA – To Us, Quality Is Everything! That Is Why We Have Engineered, Tested, And Manufactured Our Concrete Sealer Right Here in The USA. If You Are Not Happy with Our Product, NO PROBLEM – Get Your Money Back Guaranteed!
BESTSELLER NO. 7 in 2021
Armor AR350 Wet Look Concrete Sealer and Paver Sealer with Low Gloss Finish (1 GAL)
Penetrating high solids acrylic coating with unmatched bonding characteristics.
Durable, long lasting, professional grade solvent based acrylic offering superior performance abilities.
Satin sheen wet look finsih. Will bring out color in dulled substrates.
Can be used on poured concrete, stamped concrete, concrete pavers.
1 gallon will cover up to 100 square feet in two coats.
BESTSELLER NO. 8 in 2021
5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer, and Paver Sealer
Water based, breathable, low VOC, high solids Silane Siloxane sealer that can be used on unsealed interior and exterior, vertical and horizontal concrete, brick, pavers, flagstone, and slate.
Approved by the Department of Transportation in several states as a penetrating concrete sealer for use on roadways and bridgedecks to reduce damage and deterioration caused by water absorption.
Will maintain the natural, unsealed look and feel of the substrate. Won't leave behind a slippery surface film, won't change the look or color.
Easy to apply with a pump sprayer! Two back-to-back coats will yield up to 7-10 years of protection!
Contains up to 10X more active ingredients than competing products. Manufactured in the USA! No recycled or imported resins in our formulas!
BESTSELLER NO. 9 in 2021
1 Gallon DOMINATOR SG+ High Gloss Paver Sealer and Decorative Concrete (Wet Look) â€“ Solvent Free, Twice The Coverage Rate (up to 400 sq ft)
WET LOOK, HIGH GLOSS: Give yourself the gift of outstanding curb appeal with the DOMINATOR SG+. It restores faded colors, gives a high sheen on medium to darker pavers (medium gloss on light pavers), and improves the durability of your pavers or decorative concrete. Not intended for stone or clay brick pavers.
PROTECT YOUR PAVER INVESTMENT: DOMINATOR SG+ is a breathable, film forming paver sealer that protects from oil stains, mold, mildew and other spills while providing incredible UV protection. DOMINATOR SG+ has low slip potential unlike most solvent based sealers.
SOLVENT FREE: DOMINATOR SG+ provides the ultimate shine and color enhancement formula while also being solvent free and eco-friendly. Breathe easy while applying DOMINATOR SG+ since there are no foul odors. This makes for an easy cleanup and application process.
COVERAGE RATE: Your money goes farther with this product with our amazing coverage rate up to 400 square feet per gallon, per coat, and up to 5 years before resealing. You will save money and time with reduced maintenance when you seal with DOMINATOR SG+.
EASY SPRAY ON APPLICATION: Sealing with DOMINATOR SG+ paver sealer is quick and easy using our application guide, that is included with every purchase, as well as our application videos. For porous pavers that require two coats, allow 45 minutes between coats. Denser surfaces, like retaining walls, dense pavers and some previously sealed surfaces (with water-based sealer) may only require one coat of sealer.
BESTSELLER NO. 10 in 2021
ToughGloss Concrete Sealer (Semi-Gloss) - #1 Easy Use Wet Look Acrylic Sealer for Driveways, Patios, Garage Floors, Walkways, Paver, and Other Concrete Surfaces - Protect Your Concrete
DARE TO COMPARE: Made with MicroEmulsion Technology, ToughGloss separates itself as the best semi-gloss concrete sealer on amazon. If you’re looking for a long lasting and professional quality “wet look” concrete sealer for decorative concrete and all other concrete surfaces, order ToughGloss today.
STUNNING, PROTECTED CONCRETE: ToughGloss is a water-based, Indoor - Outdoor, pure acrylic sealer. It’s formulated to protect your concrete and withstand the elements(inside and out) so you don’t need to re-apply every year. ToughGloss professional concrete sealer is made with a wet look semi-gloss finish that is sure to make your neighbors jealous.
TRANSFORM ANY CONCRETE SURFACE: ToughGloss is perfect for any concrete surfaces such as; Concrete driveways, sidewalks, floors,cultured stone, decorative masonry walls, Terrazzo, concrete pavers, precast units, and Stamped, stenciled, colored, acid stained concrete.
EASY TO APPLY: Unlike other wet look sealers, ToughGloss is extremely easy to apply. Professional results can be easily achieved with a paint roller, brush, or sprayer. Can easily cover over previously applied solvent based, or water based systems. ToughGloss is compliant with all VOC regulations in the United States and Canada. ToughGloss dries to a clear, medium-gloss finish, but a higher gloss can be achieved with additional coats.
10 YEARS TOUGH PROMISE: We know it works and we’re giving you 10 years to try it out. If you don’t like it, just let us know and we will provide a full refund.
You do not have to use a cure and seal, but it is important to seal your concrete. Whether you want to cure in in the first 2-28 days, or wait six months, that is entirely your preference. Sealing your concrete will protect it against damage and deterioration against water absorption and surface abrasion.
Left unsealed, the colors will fade, water marks may be an issue, and stains can penetrate leaving ugly oil spots where the service guy left his old jalopy parked on the driveway. It's pure and simple, the job just won't last without a good sealer.
If you are applying the sealer to stamped concrete driveway, the cost is as low as $0.39/square foot, but if you are hiring someone to apply the stamped concrete sealer for you, the cost can be as high as $12.00/square foot.
Maintaining the sealer on a stamped concrete surface is a must. For maximum protection, it is recommended to seal after new concrete has cured and re-seal your stamped concrete every year for existing concrete.
Sealer Turned A White or Cloudy Color A white or cloudy color is caused by moisture that is trapped inside the sealer. ... However, if it's too hot and too humid, then also it's possible the sealer surface could dry faster than the moisture can escape. The sealer was applied too thick.
Stamping concrete gives a textured pattern to an otherwise flat patio. ... You can only stamp concrete when it is still wet from a pour. To add texture to an existing patio, pour a fresh layer of concrete over the old and stamp it, provided the existing patio is in good condition.
. Depending on weather conditions and concrete curing, wash off excess release agent in the next 1-3 days. Mix dish soap with water, and use a scrub brush or broom to remove approximately 75% of the excess powder release agent.