A clamp meter is primarily built for measuring current (or amperage), while a multimeter typically measures voltage, resistance, continuity, and sometimes low current. ... The main clamp meter vs multimeter difference is that they can measure high current, while multimeters have higher accuracy and better resolution.
Over and above that, how do you use a clamp multimeter?
In addition to, how do I test my clamp meter? How to measure current with a clamp meter
Turn the dial to the proper function, either A ac or A dc. ...
Note: When the measured current is < 0.5 A, the center dot in the display icon ( ...
Before taking dc current measurements (if your meter is equipped to do so): Wait for the display to stabilize, then push the Zero button to ensure correct readings.
So anyway, how do I choose a multimeter?
What is the best multimeter?
View the Best Multimeter, Below.
Craftsman 34-82141 Digital Multimeter. ...
Fluke 117 Electricians True RMS Multimeter. ...
Cen-Tech Digital Multimeter. ...
Etekcity Digital Voltage Tester Meter. ...
Extech EX330 Autoranging Mini Multimeter. ...
Klein Tools 69149 Electrical Test Kit. ...
Crenova MS8233D Auto-Ranging Digital Multimeter.
BESTSELLER NO. 1 in 2021
Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional Features: data hold, max reading, and an easy-to-read large LCD
Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
BESTSELLER NO. 2 in 2021
KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC CURRENT)
True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.
BESTSELLER NO. 3 in 2021
Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter, Continuity Tester, GFCI Tester, Line Splitter, Case, Leads, 3 x AAA
Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
CAT III 600V, Class 2, Double insulation safety rating
AC Auto-Ranging 400 amp digital clamp meter
BESTSELLER NO. 4 in 2021
Klein Tools CL800 Digital Clamp Meter, Auto-Ranging True RMS, Low Impedance (LoZ) Mode, 600 Amp, Measures Volts, Temp, More, with Auto-Off
Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
Thermocouple probe measures temperature
Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
BESTSELLER NO. 5 in 2021
Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect
▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
BESTSELLER NO. 6 in 2021
Fluke 323 True-RMS Clamp Meter
Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
BESTSELLER NO. 7 in 2021
Clamp Meter, Digital Multimeter 600 Amp TRMS 6000 Counts NCV with AC Current AC/DC Voltage Test Resistance Continuity Capacitance Temperature Measure Auto-Ranging - Tacklife CM02A
▲SAFE AND QUICK MEASUREMENT - Auto Ranging accurate measures AC current to 600 A, AC and DC voltage to 600V, resistance to 6000Ω, temperature tester,quick response， perfect troubleshooting tool to help you solve automotive or household electrical problems quickly and safely
▲SPECIAL LOW IMPEDANCE TEST FOR HIGHER ACCURACY - Measure the blocked voltage when connected to the wire for more accurate measurement. Low Pass Filter, measuring low frequency signals with the tip clamp. Work is more convenient, improve your life quality
▲BRIGHT BACKLIGHT DISPLAY - With the backlight display to read and record easily under dark areas. Automatically enters sleep mode after 10 minutes of inactivity for energy conservation. Devoting to optimize user experience, perfect for both professional or new users
▲DATA HOLD AND CARRYING CASE - Data retention and backlight buttons on the side of the amp meter make it easy to take readings while you operate. The meter is equipped with a carrying case that you carry and save
▲PACKAGE CONTENT: 1 x Tacklife CM02A Advanced Clamp Meter, 1 x K-Type Thermocouple, 1 x Test Leads (Pair), 2 x 1.5V AAA Batteries, 1 x User Manual, 1 x Cloth Pouch, 1 x 24-Month After-sale service card
BESTSELLER NO. 8 in 2021
Digital Clamp Meter Meterk 6000 Counts TRUE RMS NCV AC/DC Voltage Auto Range AC Current Clamp Multimeter Capacitance Resistance Frequency Temperature Measure (Black Digital Clamp Meter)
【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement
【With NCV&LIVE Line Test Function】Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire
【Continuity Test & Over Load Protection】Designed to safely and accurately confirm the circuit conducts electricity with low voltage indication and overload protection. Shows "OL" on the LCD if over range
【Easy to Use and Read With Large LCD Screen】Small and portable to carry and use. High resolution and low battery indication. The flashlight access convenient AC current measurement in the dark. Data hold, auto range and auto power off
【You Will Get】Meterk Digital Clamp Meter, 1 Pair of Test Probe, 1 Temperature Probe, 3 AAA Batteries(Inside the Clamp meter), User Manual (English + French + German + Italy + Spanish), 1 Storage Bag
BESTSELLER NO. 9 in 2021
Proster 6000 Counts Clamp Multimeter Digital Auto-Ranging Tester AC DC Current Voltage Clamp Meter with Temperature NCV TRMS Continuity Capacitance Resistance Frequency Diode Hz Test
【Reliable Clamp Multimeter with True RMS】Accurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household.
【Auto-Ranging with NVC】The meter will automatically select the appropriate auto range; NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way
【Clamp Measuring】Clamp jaw measures AC current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles
【Continuity Test & Overload Protection】 Designed to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.
【Features】high resolution, large backlit LCD screen and clamp light to improve visibility in dark place. Low battery display and automatic power off after 15 minutes inactivity. A soft zippered pouch included keeps everything neatly together and organized; portable to carry and use. Widely used in your life.
BESTSELLER NO. 10 in 2021
Clamp Meter Amp meter Digital Multimeter 6000 Counts with NCV Auto-Ranging Testing AC/DC Current&Voltage, Continuity Electrical Tester, Diode, Resistance, Capacitance, Frequency- Tacklife
▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz) ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
▲Non-Contact Voltage Detection & Overload Protection - If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
▲Multifunctional & Easy to read - High-Definition Large Back-lit LCD provides better visibility in dark working area; ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Data hold function; Low battery indicator
▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use; The test leads are easy to grip; The design is Ergonomic and portable for easy use, perfect for both professional or new users
▲ What You Get: 1x Tacklife CM06 Digital Clamp Meter, 2x Test Leads, 2x AAA Batteries, 1x User Manual, 24 month service; Be assured of purchase Tacklife CM06 digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problem
AC/DC current: Current, measured in amperes, is the flow of an electric charge and is the most basic measurement of a clamp meter. Current can be used to generate heat as well as magnetic fields, which are widely used for motors, inductors, and generators. Most modern clamp meters can measure both AC and DC current.