Best Chute Blocker

Category: chute blocker 👁 385 👍 15 ★★★★☆4

The discharge chute removes long, thick and moist grass from the underside of the mowing deck as quickly as possible. It also helps your mower power through the long, wet grass. This eliminates the grass clippings from building up and getting trapped in the cutting area.

At any event, is it better to mulch or side discharge?

No. Both side-discharge and mulching mowers leave grass blades behind. However, a mulching blade chops up clippings into finer pieces so they decompose faster and don't clump as quickly. Using a side-discharge mower you may need to do your own mulching by running over your grass piles multiple times.

In every way, how do I install advanced chute? Installation Instructions:

  • Remove existing Discharge Chute.
  • Place the Advanced Chute System on the deck in the closed position. Ensure the shield is pushed against the discharge area so it is sealed around the edges. ...
  • Mark and drill 3/8" holes. ...
  • Secure the ACS to the deck with the 3/8" bolts.
  • Even, how do you install a John Deere discharge chute?

    Install Mower Discharge Chute

  • Hold chute firmly on mower deck when installing. M47397.
  • Install mower discharge chute to mower deck with two bolts (A) and lock nuts (B).
  • Tighten nuts to 20 N·m (15 lb-ft).
  • Check hinge action by opening and releasing the chute. The chute must spring back completely to the lowered position.
  • What is the purpose of a chute guard?

    Protect people and property from flying debris, keep grass out of flower beds and driveways, reducing raking, blowing and re-mowing.

    BESTSELLER NO. 1 in 2021

    The Green Guard - Motorized Chute Blocker (w/Rubber Guard)

    The Green Guard - Motorized Chute Blocker (w/Rubber Guard)
    • The Best Operator Controlled Discharge Chute! Keep Grass Clippings out of your Customer's mulch beds!
    • Universal - For Commercial Mowers - Zero Turns/Standers/Walk-Behinds!
    • Motorized w/easy Handle-Mount Controls! * Allows Bagger Installation - Folds completely up out of the way!
    • Go to our website and Print Fit Check to ensure base will mount on your mower without interference (www.the-green-guard/fit-check.com)!
    • 30 Day Money Back Guarantee! $10 from every sale goes to charity!
    BESTSELLER NO. 2 in 2021

    NPW Chute Blocker - Mulch Plate for Bad Boy MZ 42", 48" & 54"

    NPW Chute Blocker - Mulch Plate for Bad Boy MZ 42
    • It's perfect for turning your mower into a mulching machine - especially on leaves for fall cleanups!
    BESTSELLER NO. 3 in 2021

    Qwikchute Chute Blocker/Deflector for Scag, Tiger Cub & Velocity Plus Mowers w 48” Decks (Quickchute) NQD-STC48

    Qwikchute Chute Blocker/Deflector for Scag, Tiger Cub & Velocity Plus Mowers w 48” Decks (Quickchute) NQD-STC48
    • Qwikchute Chute Blocker for Scags, Tiger Cub & Velocity Plus / Qwikchute Part # NQD-STC48
    • Fits 48" Lawn Mower Decks
    • With only minimal effort and a few seconds, the mower operator can choose how to direct the grass clippings, from Mulch, to Full Discharge or 1 Partial Discharge position. This simple, mechanical operation ensures years of Trouble Free Service.
    • The Qwikchute installs in 30 minutes. *** Please Note, Not Compatible with Walk-Behind Lawn Mowers & Some Modifications May be Required Upon Installation ***
    • Includes: Qwikchute Chute Blocker Deflector
    BESTSELLER NO. 4 in 2021

    NPW Chute Blocker Compatible With Bad Boy ZT Elite 48", 54", 60"

    NPW Chute Blocker Compatible With Bad Boy ZT Elite 48
    • Type: MULCH PLATE
    • NPW Chute Blocker for Bad Boy ZT Elite 48",54", 60" does not fit the mz
    BESTSELLER NO. 5 in 2021

    Stens Trimmer Trap Bb-1-wb-3 Blade Blocker-Walk Behind

    Stens Trimmer Trap Bb-1-wb-3 Blade Blocker-Walk Behind
    • Sold on Amazon
    BESTSELLER NO. 6 in 2021

    Advanced Chute System: Mower Discharge Shield - #ACS6000B

    Advanced Chute System: Mower Discharge Shield - #ACS6000B
    • Fits Virtually All Zero-Turn Mowers--See Compatibility Chart To Find Your Mower's Model
    • Take Complete Control Of Your Mower Discharge
    • Perfect For Turning Your Mower Into A Mulching Machine
    • All Steel 1/4" Mounting Plate and 11 Gauge Steel Shield with Lever Engagment
    • Easily Installs In Minutes
    BESTSELLER NO. 7 in 2021

    Qwikchute Chute Blocker/Deflector for Toro Z Master G3 Turbo Force Mowers 52" 60" 72" Decks (Quickchute) NQD-TG3-5260

    Qwikchute Chute Blocker/Deflector for Toro Z Master G3 Turbo Force Mowers 52
    • Qwikchute Chute Blocker / Deflector for Toro ZMaster 52", 60" & 72" G3 Turbo Force Deck / Qwikchute Part # NQD-TG3-5260
    • Fits 52", 60" & 72" Lawn Mower Decks
    • With only minimal effort and a few seconds, the mower operator can choose how to direct the grass clippings, from Mulch, to Full Discharge or 1 Partial Discharge position. This simple, mechanical operation ensures years of Trouble Free Service.
    • The Qwikchute installs in 30 minutes. *** Please Note, Not Compatible with Walk-Behind Lawn Mowers & Some Modifications May be Required Upon Installation ***
    • Includes: Chute Blocker Deflector
    BESTSELLER NO. 8 in 2021

    Qwikchute Chute Blocker Deflector Hustler Super Z & X-ONE Mowers 48” 54" 60" 66” 72” VX4 Decks (Quickchute) NQD-H1X5460

    Qwikchute Chute Blocker Deflector Hustler Super Z & X-ONE Mowers 48” 54
    • Qwikchute Chute Blocker / Deflector for Hustler Super Z & X-ONE / Qwikchute Part # NQD-H1X5460
    • Fits 48”, 54", 60", 66” & 72” Lawn Mower Decks
    • With only minimal effort and a few seconds, the mower operator can choose how to direct the grass clippings, from Mulch, to Full Discharge or 1 Partial Discharge position. This simple, mechanical operation ensures years of Trouble Free Service.
    • The Qwikchute installs in 30 minutes. *** Please Note, Not Compatible with Walk-Behind Lawn Mowers & Some Modifications May be Required Upon Installation ***
    • Includes: Qwikchute Chute Blocker / Deflector
    BESTSELLER NO. 9 in 2021

    Qwikchute Chute Blocker/Deflector for Ferris ICD Decks & Evolution Mowers with 52” Decks (Quickchute) NQD-FSICD52

    Qwikchute Chute Blocker/Deflector for Ferris ICD Decks & Evolution Mowers with 52” Decks (Quickchute) NQD-FSICD52
    • Qwikchute Chute Blocker for Ferris ICD Deck & Evolution / Qwikchute Part # NQD-FSICD52
    • Fits 52" Lawn Mower Decks
    • With only minimal effort and a few seconds, the mower operator can choose how to direct the grass clippings, from Mulch, to Full Discharge or 1 Partial Discharge position. This simple, mechanical operation ensures years of Trouble Free Service.
    • The Qwikchute installs in 30 minutes. *** Please Note, Not Compatible with Walk-Behind Lawn Mowers & Some Modifications May be Required Upon Installation ***
    • Includes: Qwikchute Chute Blocker
    BESTSELLER NO. 10 in 2021

    Qwikchute Chute Blocker/Deflector for John Deere Mowers w 60" Decks (7-Iron II Pro Deck) (Quickchute) NQD-JD60B

    Qwikchute Chute Blocker/Deflector for John Deere Mowers w 60
    • Qwikchute Chute Blocker / Deflector for John Deere 60" 7-Iron II Pro Deck / Qwikchute Part # NQD-JD60B
    • Fits 60" Lawn Mower Decks
    • With only minimal effort and a few seconds, the mower operator can choose how to direct the grass clippings, from Mulch, to Full Discharge or 1 Partial Discharge position. This simple, mechanical operation ensures years of Trouble Free Service.
    • The Qwikchute installs in 30 minutes. *** Please Note, Not Compatible with Walk-Behind Lawn Mowers & Some Modifications May be Required Upon Installation ***
    • Includes: Qwikchute Blocker Deflector

    11 More Questions Answered

    What is a grass flap?

    GrassFlaps are Operator Controlled Discharge Chutes (OCDC) operated with a FOOT PEDAL. With it you can block the discharge chute on any Zero Turn lawnmower.

    What is a chute blocker?

    Chute Blocker VS Mulch Kit A mulching kit attached to the lawn mower helps the machine to mulch the grass and leave it in the lawn to nourish it whereas a chute blocker is a blockade that covers the storage of the cut grass or the mulching kit so that they do not offload the clippings all around the lawn.

    How do you install a grass flap?

    How do you hold a discharge chute on a lawn mower?

    How do you install a torsion spring on a lawn mower?

    Is it OK to leave grass clippings on lawn?

    Note: Grass clippings are good for your lawn as they will offer healthy nutrients to your lawn's soil, and it is still fine to leave them behind after mowing. Longer grass can invite lawn pests, which often hide in shady areas of your yard.

    Should you mulch every time you mow?

    Most of the time, mulching your clippings is the best option. You should bag your clippings if the grass is tall, leaves are covering the lawn, or you need to prevent disease and weeds from spreading. Whether you're mulching or bagging, Hutson has the right tools for the job.

    How often should you sharpen your mower blades?

    every 20 to 25 hours

    How do I stop grass from clumping when I mow?

    How to prevent grass clumping when mowing
  • 1 – It's too wet. ...
  • 2 – It's too long. ...
  • 3 – Your mower isn't up to the job. ...
  • Mow when it's dry. ...
  • Mow frequently. ...
  • Don't cut more than a third at a time. ...
  • Consider upgrading.
  • Why does my mulching mower leave clumps of grass?

    Mulching blades chop the clippings into finer pieces than regular push mower blades. Finer clippings are less likely to clump, and they break down faster than longer clippings. Dull blades tear the grass rather than cutting it and give the grass a brownish cast, so keep the blades sharp.

    Which is better mulching blade or regular?

    Standard blades are the ideal choice when mulching the grass clippings may not be an option. ... Over-grown grass can clog under the mower deck and leave unsightly clumps of grass on the freshly mowed lawn. Mulching blades, also known as 3-in-1 blades, can be used to bag, discharge, or mulch grass clippings.