Best Brake Line Flaring Tool

Category: brake line 👁 191 👍 21 ★★★★☆4.4

Absolutely, Yes! Flares on the brake lines provide additional protection against brake fluid leakage.

At any event, do brake lines need to be double flared?

Double flares are necessary for brake lines due to the high pressures inflicted on them by the hydraulic system. Single flared lines are only appropriate for low-pressure lines due to their tendency to crack or leak.

Additional, what are the different types of brake line flares? There are two basic types of flares used on OEM automotive brake systems throughout the world. The SAE/double (inverted/45degree) flare and the DIN/ISO bubble flare. We will refer to them as SAE or DIN flare. The most common is the SAE flare.

Aside from that, can you flare stainless steel brake line?

The two most common falsehoods that I'm aware of are: You can't double flare stainless, and stainless lines are more prone to leaking than standard steel lines. ... So, keep in mind that stainless is the way to go when it comes to good-looking, long-lasting street rod brake lines.

How do you fix a brake line fast?

BESTSELLER NO. 1 in 2021

Titan 51535 3/16-Inch Double Flaring Tool

Titan 51535 3/16-Inch Double Flaring Tool
  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing.
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle.
  • Handle can be removed if you prefer to use in a bench vise.
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles.
BESTSELLER NO. 2 in 2021

ARES 18019 - Double Flaring Tool Set with Extra Adapters- Use on Copper, Aluminum, Soft Steel Brake Line and Brass Tubing - Includes Mini Tubing Cutter and Storage Case

ARES 18019 - Double Flaring Tool Set with Extra Adapters- Use on Copper, Aluminum, Soft Steel Brake Line and Brass Tubing - Includes Mini Tubing Cutter and Storage Case
  • INCLUDES: This Double Flaring Tool Kit includes one 1/4-inch adapter, a 5/16-inch adapter, and a 1/2-inch adapter and two adapters in each of the following sizes: 3/16-inch and 3/8-inch. These adapter sizes also cover sizes 4.8-12.7mm. Our Double Flaring Tool kit also includes a mini tubing cutter with a 1/8- 5/8-inch capacity and a convenient storage case to ensure that you'll never misplace part of your kit. *Additional adapters available in ARES 18020 - Double Flaring Tool Adapter Set.*
  • QUALITY: The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in reducing friction.
  • APPLICATIONS: This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES double flaring tool, simply contact customer service for troubleshooting help, parts, replacement, or refund. Need a manual? Download it for free on our website!
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
BESTSELLER NO. 3 in 2021

TGR Professional Brake Line Flaring Tool- 45 Degree Set - Single, Bubble, and Double Flares

TGR Professional Brake Line Flaring Tool- 45 Degree Set - Single, Bubble, and Double Flares
  • Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing.
  • Creates Single Flares, Bubble Flares, and Double Flares
  • Easy operation. Mounts in a vise
  • T-handle screw clamp securely holds die and tube
  • Each tool comes pre-tested from the factory and includes the sample flare from the test.
BESTSELLER NO. 4 in 2021

MASTERCOOL 72475-PRC Universal Hydraulic Flaring Tool Set with Tube Cutter, Blue and Silver

MASTERCOOL 72475-PRC Universal Hydraulic Flaring Tool Set with Tube Cutter, Blue and Silver
  • TUBE AND DIE SET STABILIZING ARM for easy tube forming
  • MAGNETIC ADAPTER holder keeps adapters in place
  • EQUIPPED WITH AN ENGLARGED DIE SET COMPRESSION AREA for better grip of dies
  • THIS TOOL CAN BE USED ON "annealed steel" & "dead soft"
  • INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8"; GM fuel line flare, brake lines and transmission 5/16 and 3/8"; flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2"; metric bubble flare 4.75, 6, 8, and 10mm, mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O.D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case
BESTSELLER NO. 5 in 2021

OTC 6502 Master Brake Flaring Tool Kit

OTC 6502 Master Brake Flaring Tool Kit
  • Covers single double and bubble type flares
  • Single flare standard lines 3/16 inch - 5/8 inch and single flare metric lines 4 millimeters - 14 millimeters
  • Double flare standard lines 3/16 inch - 1/2 inch and double flare metric lines 4 millimeters - 10 millimeters
  • Bubble flare standard lines 3/16 inch - 1/2 inch and bubble flare metric lines 4.75 millimeters - 10 millimeters
  • Kit contains flaring bar, arbor press, adapters, tube cutter, and debarring tool - all in a hard case
BESTSELLER NO. 6 in 2021

Capri Tools 3/16 in. Double Flaring Tool (CP21110-316)

Capri Tools 3/16 in. Double Flaring Tool (CP21110-316)
  • Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines
  • Works flawlessly with 3/16 in. steel, nickel, and copper tubing
  • Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots
  • Detachable die lets you also use with a bench vise
  • All-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool
BESTSELLER NO. 7 in 2021

Brake line Flaring Tool, Double Flaring Tool kit Copper Aluminum Soft Steel Brake Line and Brass Tubing Tools 45 Degree Flares

Brake line Flaring Tool, Double Flaring Tool kit Copper Aluminum Soft Steel Brake Line and Brass Tubing Tools 45 Degree Flares
  • Brake line flaring tool, double flaring tool kit
  • QUALITY: The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in reducing friction.
  • APPLICATIONS: This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing.
  • INCLUDES: This Double Flaring Tool Kit includes five adapters - 3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm),Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
BESTSELLER NO. 8 in 2021

Auto Double Flaring Tool Kit Copper Aluminum Soft Steel Brake Line and Brass Tubing Tools 45 Degree Flares

Auto Double Flaring Tool Kit Copper Aluminum Soft Steel Brake Line and Brass Tubing Tools 45 Degree Flares
  • Double flaring copper aluminum soft steel brake line tubing tool kit including 1 flaring cone,1 flaring yoke and 5 adapters; Wide range of sizes - 3/16, 1/4, 5/16, 3/8 and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm).
  • Swivel is constructed out of alloy steel and chrome plated to assist in reducing friction.
  • Heavy duty yoke is forged from heat treated steel to ensure durability and strength.
  • Designed to use when flaring double or single flare in copper,aluminum,magnesium,and brass tubing as well as soft steel brake line tubing.
  • Blow molded hard plastic storage case keeps tools contained and organized,provides a convenient handle for easy transportation and portability,provide instruction for easy use.
BESTSELLER NO. 9 in 2021

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set (Includes 3/8" and 1/2" Transmission Cooling Line Die and Adapter Sets) with Tube Cutter, Silver/Blue

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set (Includes 3/8
  • TUBE AND DIE SET STABILIZING ARM for easy tube forming
  • MAGNETIC ADAPTER HOLDER keeps adapters in place
  • EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies
  • CAN BE USED ON "annealed steel" & "dead soft"
  • INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8"; GM fuel line flare, brake lines and transmission 5/16 and 3/8"; flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2"; metric bubble flare 4. 75, 6, 8, and 10mm; GM transmission cooling line 3/8" and 1/2"; mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case
BESTSELLER NO. 10 in 2021

Lisle 33260 Flaring Tool

Lisle 33260 Flaring Tool
  • Fit Type: Vehicle Specific
  • The package length is 4.572 centimeters
  • The package height is 26.035 centimeters
  • The package width is 10.16 centimeters

7 More Questions Answered

Can I splice a brake line?

Contrary to popular belief it is NOT illegal to make a new section of brake line and splice it into a non-rusted section of your old brake, as long as you use automotive grade SAE double/inverted flare, SAE “bubble” flare and DIN Single Mushroom flare unions and fittings.

What is the best material for brake lines?

stainless steel

What angle flare is used on brake lines?

45 degree angle

Are bigger brake lines better?

smaller tubing is stiffer and lighter and easier to bend. Larger tubing has less resistance to fluid movement and is less prone to to damage during handling.

How do you make a hard line flare?

How do you flare steel lines?

How do you double flare a brake line?