Best Band Saw Blades For Cutting Wood

Category: band saw blades 👁 288 👍 22 ★★★★☆4.1

Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.

So, how do I choose a band saw blade for wood?

Choose the widest blade possible based on the cuts you will be making. When cutting curves, the width of the blade will determine the smallest radius that may be cut. Smaller width blades are used for smaller radius cuts, while larger width blades are most often reserved for resawing or near straight line cuts.

At the same time, what is the difference in band saw blades? Most regular-tooth bandsaw blades have straight or 0° rake. Regular-tooth bandsaw blades are used for general purpose cutting – either cutoff or contour sawing – in thin material. They can be used to cut most general metals and wood. ... Skip-tooth bandsaw blades have a shallow gullet and widely spaced teeth.

Even more, what is the best bandsaw blade for cutting steel?

HOW TO CHOOSE A METAL CUTTING BAND SAW BLADE - RAKE, MATERIAL AND TEETH:

Thickness of metal to be cutBlade Teeth per inch
1/8" to 1/2 inch thick18
3/32" to 1/8 inch thick24
Thickness of metal to be cutBlade Teeth per inch
7/32" to 7/8 inch thick 3/16" to 5/8 inch thick 5/32" to 3/8 inch thick10 14 18

What kind of band saw blade should I use?

A coarse tooth blade (2, 3 TPI) should be used for resawing wood and cutting thicker stock up to 8″. A fine toothed blade (18 to 32 TPI) should be used for thinner metals and plastics under 1/4″. For general cutting of 3/4″ wood 4 TPI will provide a fast cut and 14 TPI will cut slow, but leave a smoother finish.

BESTSELLER NO. 1 in 2021

Bosch BS80-15S 80-Inch X 1/8-Inch X 15-Tpi Scroll Cutting Stationary Band Saw Blade

Bosch BS80-15S 80-Inch X 1/8-Inch X 15-Tpi Scroll Cutting Stationary Band Saw Blade
  • For scroll-cut wood applications
  • Premium materials resist heat buildup for long life
  • Optimized tooth geometry for best performance
  • Lengths fit most common band saw sizes
BESTSELLER NO. 2 in 2021

Bosch BS80-6H 80-Inch X 1/2-Inch X 6-Tpi Heavy Duty Stationary Band Saw Blade

Bosch BS80-6H 80-Inch X 1/2-Inch X 6-Tpi Heavy Duty Stationary Band Saw Blade
  • For heavy-duty applications in wood
  • Premium materials resist heat buildup for long life
  • Optimized tooth geometry for best performance
  • Lengths fit most common band saw sizes
BESTSELLER NO. 3 in 2021

Olson Saw WB57262DB 62-Inch by 3/8 wide by 4 Teeth Per Inch Band Saw Blade

Olson Saw WB57262DB 62-Inch by 3/8 wide by 4 Teeth Per Inch Band Saw Blade
  • 62-Inch by 3/8-Inch wide by 4 HookTeeth Per Inch Band Saw Blade
  • 10-Inch Sears Craftsman 21419 and 2442, Skill 3104 and Grizzly G8976 3-Wheel Band Saw
  • Re-Saw Cutting
  • Made with Pre-Tempered High Carbon Steel Material
  • Made In The USA
BESTSELLER NO. 4 in 2021

AYAO Pack of 3 Band Saw Blades 62 Inch X 1/4 Inch X 14TPI

AYAO Pack of 3 Band Saw Blades 62 Inch X 1/4 Inch X 14TPI
  • Fits Powertec 9-Inch Band Saw BS900, Harbor Freight 96980, 60500, Craftsman 21419, Masterforce 2403731
  • Mainly for cutting wood, PVC and thin aluminium
  • Unique welding technique :strong and smoother welding point
  • Thinner blades for longer life
  • Raker set teeth arrangement, all teeth arranged evenly for better cutting performance
BESTSELLER NO. 5 in 2021

POWERTEC 13197 80" x 3/8" x 24 TPI Band Saw Blades

POWERTEC 13197 80
  • Includes: 80 inch band saw blade (one piece) – suitable for most 80” long, 3/8” wide, 0. 014” thick, band saw blades
  • Quality: the band saw blade is made from premium, high grade carbon steel with heat resistance and weld
  • Design: This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds
  • Application: flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals
  • Teeth specs: 24TPI blade has a raker set/ Regular teeth profile
BESTSELLER NO. 6 in 2021

Bosch BS9312-6W 93-1/2-Inch by 1/4-Inch by 6TPI Wood Bandsaw Blade

Bosch BS9312-6W 93-1/2-Inch by 1/4-Inch by 6TPI Wood Bandsaw Blade
  • Made from premium grade steel
  • Resists heat build up for longer life
  • Optimized tooth geometry for best cutting performance
BESTSELLER NO. 7 in 2021

Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323

Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
BESTSELLER NO. 8 in 2021

AYAO Wood Band Saw Blade 70-1/2 Inch X 3/8 Inch X 14TPI, 2 Pack

AYAO Wood Band Saw Blade 70-1/2 Inch X 3/8 Inch X 14TPI, 2 Pack
  • Fit 10" Craftsman 921400 Band Saw
  • Wood and general purpose cutting
  • Unique welding technique :strong and smoother welding point
  • Thinner blades for longer life
  • Raker set teeth arrangement, all teeth arranged evenly for better cutting performance
BESTSELLER NO. 9 in 2021

Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades

Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades
  • Prolongs blade life and produces smoother and quicker cuts
  • Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch
  • For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades
  • Country of Origin:United States
BESTSELLER NO. 10 in 2021

AYAO 70-1/2-Inch X 1/4-Inch X 14TPI Band Saw Blade, 2-Pack

AYAO 70-1/2-Inch X 1/4-Inch X 14TPI Band Saw Blade, 2-Pack
  • Fit 10" Craftsman 921400 Band Saw
  • Wood and general purpose cutting
  • Unique welding technique :strong and smoother welding point
  • Thinner blades for longer life
  • Raker set teeth arrangement, all teeth arranged evenly for better cutting performance

9 More Questions Answered

How tight should a bandsaw blade be?

The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you're tensioning a 3/8-in. blade, I would set the scale to 1/2 in.

What is the best general purpose bandsaw blade?

Something in the 6-8 range is a good general-purpose blade. Also, hook tooth blades have a deeper gullet/larger tooth and a positive 'rake angle' which helps the blade to feed into the material more aggressively. The other blade that I use on my 14" bandsaw is the 1/2" 3 TPI hook tooth blade.

Why is my bandsaw burning the wood?

A majority of issues with wood burning is because of a dull saw blade. These blades may not be sharp enough to efficiently cut the wood, and thus create enough friction to heat and burn the wood. Dull blades make it more challenging to cut, which causes friction as you pass the wood through.

How do you pick a bandsaw?

The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw's depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut.

How long should a bandsaw blade last?

Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.

When using a saber saw how can you avoid splintering the good side of the work?

Since splintering occurs mainly on the side where the teeth of the saw exit as the cutting stroke is completed, the simplest way to minimize the problem in most cases is to cut from the side that will cause splinters to occur on the back, or least objectionable, side (the side that will not be seen when the project is ...

How do you break in a bandsaw blade?

Band Saw Blade Break-In Procedures
  • Maintain recommended band speed.
  • Reduce feed pressure to 1/2 normal rate.
  • Run at these settings for the first 50 square inches of material cut (150 square inches on mild and low carbon steel)
  • How do I choose a metal cutting band saw blade?

    The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.

    How do I choose a hacksaw blade?