Approximate Lengths for HF Ham Band Dipole Antennas
Band (MHz)Length (Feet)Length (metres)
14.00 (20 metres)
21.00 (15 metres)
So anyway, what is the best HF antenna?
Top 10 Best HF Vertical Antenna Buyer's Guide
HY-Gain Vertical Antenna – Great Choice for Versatility. ...
Super Antenna MP1LXMAX – Perfect Option for Amateur Radioing. ...
Sigma Euro Comm Fibre Glass Antenna – Solid Antenna Without Radials. ...
Super Antenna MP1DXG – Ideal For Outdoor Excursions.
Forbye, how long is a dipole antenna? When determining how long to make each leg of a Dipole antenna, dividing the frequency in MHz into 468 will give the overall length. To find the half wave, divide that number by two. This will give you the length of each leg of the antenna.
Along, what is a HF antenna?
High frequency (HF) is the ITU designation for the range of radio frequency electromagnetic waves (radio waves) between 3 and 30 megahertz (MHz). It is also known as the decameter band or decameter wave as its wavelengths range from one to ten decameters (ten to one hundred meters).
A beam type of antenna at a height of 70 feet or more will provide greatly superior performance over the same antenna at 35 feet, all other factors being equal. A height of 120 feet or even higher will provide even more advantages for long-distance communications.
BESTSELLER NO. 1 in 2021
Shark Antennas S-F20 Mono Band HF 20 Meter Mobile Vertical Antenna with 3/8x24 Threads, Handles 250W Max
Shark HamSticks cover a single band, fiberglass mast measures 44” with integral coil and an adjustable (removable) 48" stainless steel whip.
All antennas are rated for 250W MAX power, and come with a solid black wrap.
All of the Shark HamSticks have a 3/8” x 24 thread base, convenient for many mounts.
Buy a matching set and set up a horizontally-opposed dipole, easily stashed in the attic or out back. Use a quad-mount, and buy two sets (bands) and cover your two favorite bands. Buy an octo-mount, and four matching sets/bands, and you can work DX with ease!
Please note that these antennas do not come with a mount, owing to the variety of their applications.
BESTSELLER NO. 2 in 2021
Super Antenna MP1DXTR80 HF SuperWhip Tripod All Band 80m MP1 Antenna with Clamp Mount and Go Bag ham Radio Amateur
THIS IS: The maximum Super Antenna Go Bag setup with 80 meters. The new ruggedized upgraded version of the MP1 SUPER ANTENNA, with TRIPOD, UNIVERSAL MOUNT, TITANIUM SUPER-WHIP, plus 80 METER COIL, and GO BAG. The #1 HF Portable Vertical Antenna worldwide. This package includes the entire /portable /backpack /base /travel antenna system for Ham Radio. Operators who demand top performance choose the MP1DXTR80 for transmitting and receiving on HF and VHF radio frequencies.
Perfect for Vacation. PACKAGE CONTENTS: MP1C Super Antenna + SW1 Titanium SuperWhip + TM1 Low Profile Tripod + UM2 SuperMount + SP3 SuperSpike + MC80 Coil + MR4010 Super Radial Set + MR8075 Radial + MR642 Radial Set + FG1 SWR Ruler + GB Super Go Bag. Everything collapses down to pack into the stealth black Go Bag zip case, which features internal hidden velcro pockets.
SIZE: Total antenna extended length 7ft (2.13m). Antenna Collapsed Size: 12 inches(30cm). Go Bag Size: 13"x9"x3.5" (33x23x9cm) WEIGHT: Antenna itself weighs 1 pound (0.4kg). Antenna with everything in the Go Bag totals 5 pounds. Power Rating: 500W SSB, 300W CW/DATA. EFFICIENCY: Within 1dB of a full size quarterwave vertical antenna on 20 meters (as measured at the HFpack Shootout). COMPATIBILITY: Fully compatible with all Amateur Radio transceivers. CONNECTOR: SO-239 (PL259 compatible 50 ohms).
FREQUENCIES: ALL BANDS 80m, 75m, 40m, 30m, 20m, 17m, 15m, 12m, 11m, 10m meters (3.5MHz to 4.8MHz and 7MHz-30MHz) HF, plus VHF 6m (30MHz-54MHz) with a good SWR. Continuously tunes all frequencies Marine, Government, NGO, CAP, MARS, EmComm, Shortwave, CB, and everything in between. Direct Manual Tuning SuperSlider Coil, with Good SWR. Analyzer or tuner not needed but can help.
FEATURES: This durable SuperWhip features an amazing new indestructible Titanium metal alloy, so flexible that it can be rolled up in an 12 inch diameter circle and stowed in the GB Super Go Bag. The TM1 Low Profile Tripod sets up on any flat surface. The UM2 SuperMount clamps to most surfaces, fences, ladders, tables, benches, railings, or attaches with included U-bolt to any 1.25" pipe, post, or balcony railing.
BESTSELLER NO. 3 in 2021
40-6LPOCFD Off Center Fed Antenna for 40, 20, 10 and 6 Meters
BESTSELLER NO. 4 in 2021
20 Meter Half Wave Dipole Antenna with W2FMI 1500 Watt Balun
Made in the USA
20 Meters / 14 MHz
Made from #14 7/22 stranded hard-drawn copper wire
Will handle up to 1500 Watts with SWR below 2:1
Stainless Steel Hardware
BESTSELLER NO. 5 in 2021
HF Short 20 Meter Mobile HF Stick Antenna 3ft
Approx. 3ft Tall! Black.
Consists of approx. 2ft fiberglass base section w/ 12" tuneable Stainless top whip.
Has regular 3/8-24 base thread.
Great for areas where a 7-8ft stick is too tall!
For 20 Meter Band, Optional Mount & cable reqired.
BESTSELLER NO. 6 in 2021
20 Meter Band HF Mobile Stick Antenna
Mobile Antenna for the 20 Meter Ham Radio Band.
Approx. 4ft Black fiberglass topped with 4ft stainless stell tunable whip.
Has standard 3/8-24 base mounting thread, handles 250 Watts.
Requires suitable Optional mount & cable.
BESTSELLER NO. 7 in 2021
HAM Equipment 1-30Mhz Shortwave Radio Balun Kit NXO-100 Magnetic Balance Amateur Radio Antennas DIY
HAM Equipment 1-30Mhz Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz .
It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY.
1:1 balun is suitable for bipolar DP antenna (inverted V positive V) antenna such as Yagi (40-100Ω). 1:4 balun for LOOP antenna and Winton antenna (200-400Ω).
1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment.
I send the instruction to your email when you buy . Many thanks for your purchasing.
The best material to support its own weight is steel. You can use a large gauge (say, 14-12) of copper wire which will work. For short wires that won't bend, solid copper will work. If you are going to attach it to a support structure that won't flex, finer than 14 would work.
You can use speaker wire, but be aware that how you hang it and the type of antenna you build can lead to problems. If the wire includes a couple of steel strands in it you're in good shape for antennas. If it's only copper and you hang it by the ends (and pull them tight) you will lengthen the antenna over time!